This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Unceta Herramientas de calidad participa en la BIEMH con cuatro novedades

Quality tools Unceta participates in the BIEMH with four news

17/05/2010

May 17, 2010

Quality tools Unceta participates in the BIEMH (Pavilion 3 - stand D34-E33) to introduce three new products of their brands. One of them is Mitutoyo, which presented the verifier of roughness Surftest SJ-210, a portable system for the measurement of the roughness surface, suitable even for employment in the production environment. Removable advance unit allows its use both as a compact system (with integrated forward) as a system flexible for the measurement in inaccessible positions, either placed in support of measure or caliber of heights.

Surftest SJ - 210, portable system for the measurement of surface roughness, suitable even for employment in the production environment.

Also, antifatiga 'Comfort', equipped with a protective layer of Dyna-ShieldTM which lengthens the life of the product by 50% in relation to the normal display vinyl also exposes the carpet. Unique bubble for exceptional comfort design, their yellow edges ensure greater security. With four beveled and sides sealed to minimize the risk of stumbling, it is slip-resistant. In addition, it has the classification in class 2 in accordance with NFPA Safety Code 101 fire test.

Carpet antifatiga 'Comfort', non-slip and classification to fire class 2.

Another novelty is the drill A22185 of STD, of high-performance, prepared for drilling steels tempered with hardness from 55HRC up to 70HRC. A bit of hard metal is integral high performance, with a Tiain-Nano coating for maximum resistance to thermal wear and to ensure excellent performance.

This drill has a geometry of sharpening of the only tip with deterioration of the edges of cut for a smooth and continuous penetration and at the same time to reduce to the maximum axial pressures that occur during the drilling operation. In addition the drill bit has auto-centrado to perform holes without deviation.

This drill has a Helix of 15 ° and a reinforced core that maximizes its rigidity and optimize of the swarf.

This drill is designed to drill with breakthrough speeds high steel temperate, from 55 to 70 HRC HRC.

On the other hand, it also shows the gag of high-pressure STD, with a special design of the high pressure system that achieves a mooring up to 8,000 kilograms force. The desired mooring force preajusta through the rings of the torque control of torque. It also guarantees the repeatability of the mooring force preset each following operation. Available in two models: up to 300 160 and 490 mm; and up to 350 200 and 570 mm.

This clamp can be used both in horizontal or vertical position, with the fixed height, so that you can use several jaws of high pressure at the same time. Also offers an automatic system for downward pressure which leaves the piece positioned with an accuracy of positioning within 0.005 mm using a force of mooring of 4,500 kilograms. It is designed for use in machining centres and situations which require a high mooring force ensuring maximum accuracy.