Felder exhibits at Fimma-Maderalia machines for an integral work of wood
October 4, 2011
Regruesadora Exact 63
The Format-4 regruesadora, with a width of regrueso of 630 mm, is the solution of brushing presented Felder Fimma-Maderalia. The height of regrueso of the Exact 63, which can be regulated through electrical adjustment, is 300 mm. Dragging the timing of this machine works at a speed of 5 to 20 meters per minute.
Gluing edges G 580 X-motion Plus
These machines allow a complete machining of the parts in a single stage of work without additional adjustments. At the time of each treatment, a speed of 11 meters per minute guarantees a machining of 400 linear metres per workday (5 hours continuously). Available control panel with 5.7-inch color screen and extent of the tour, set automatic aggregates from control panel, heat exchanger tail with central command and 3 free sites for additional aggregate Finish.: radio scraper, scraper of surface and polishing added.
Profit H22 tread machining center
The team has 6 pieces with frontal ceiling supports and 2 areas of work for tilting work. The loader tool has 8 positions on shopping cart follow-up flag. It has 14 vertical portabroca spindles and 6 spindles horizontal portabroca-dash 'and' 2 sites pick-up.
Suction with purified air RL 200 systems
Felder purified air aspiration systems are, as they explain from the company, a decisive factor for their health. The concentration of the residual dust in the atmosphere is less than 0.2 grams per cubic meter. This is guaranteed by the (BIA of category G) filter elements and the fan wheel ready on the side of the filtered air.
The equipment has been tested according to test dust H3. It is mobile and has a suction outlet 200 millimetres in diameter, and sack capacity for 200 litres shavings.