Simple connection and sealed for servomotors
With frequency the servomotors use for his connection connectors M23. These compact connectors have turned into a standard in place of the boxes of creames. In these moments are the system of connection more usual.
The wirings M23 present in the market with the cover of orange colour for the connection of feeding and of green colour for the case of signals. They are a solution established for the connection of servomotors with a size of connector 1.0. Up to now for applications M23, had to wire up solutions of connection from a big number of individual parts. In any case, this solution was not sufficiently good: a lot of users complained of fault of sealed, unsuitable behaviour in front of crashes and vibrations and of a setting complicated and long.
Murrelektronik Offers connectors M8 and M12 for sensor/actuators that solve these problems. The knowledge purchased on these connectors constitutes the base for the development and manufacture of the series M23 of Murrelektronik of connectors of interface between servoreguladores and servomotors.
Murrelektronik Has manufactured cables that connect servoreguladores of Siemens with motors Siemens. The connectors M23 are available with different designs of contact for the engine.
Regarding the servoreguladores, offer several cables of feeding pre-wirings and with free extremes with precise connectors for controllers of Siemens; the cables of signal are instrumented with connectors Sub-D. Also they are available a big number of connectors Drive-Cliq. The connectors M23 of Murrelektronik are the optimum solution for the connection of the servomotors to the servo regulatory:
Ensure an estanqueidad optimum: His high consistency and the molding PUR free of halógeno ensure an estanquidad according to IP67/68. The cables are strongly subjects to the cover of the connector, which provides a release of maximum tension. The thread of hexagonal screw makes possible a safe setting and sealed – fact, obviously, with the key dinamométrica and no with the one of tube. When using the key calibrated in pair ensure some perfect connections with the tighten just predefinido.
The crash and the vibration do not affect him: The connectors are endowed with enclosures anti-vibration. This mechanism warns losses and ensures connections permanently sealed. The advantage: they are not necessary readjustments neither maintenance
Simple setting without failures of wiring: The cables are injected and tested in a 100 %, ensuring a manipulation and a totally safe installation, reducing the apparition of failures. The arrows codificadoras serve like optimum guide for the setting.
But this is not everything: The connectors M23 of Murrelektronik offer a lot of more advantages:
- A coverage of 360º and the properties ESD of the injection contribute to a high resistance to the failures EMC.
- A decrease of weight of 30% means less total weight, an interesting advantage when it treats of servomotors on elements deslizantes.
- A connection for tube coarrugado integrated . And as that dirt and dust seem related with the tube coarrugado, in Murrelektronik applies without adapter neither complicated subjections of cables. An advantage especially for customers that prefer to use the tube coarrugado.
- The quality of the wire is excellent. Murrelektronik Uses only cables PUR of maximum quality, equiparable to the one of the cables MC800+ of Siemens.
- References of clear article, according to the numbering of Siemens correspond 1:1 with the ones of Murrelektronik, to ensure a crossing of simple references.
- Murrelektronik Manufactures in segments of 10 centimetres, in requests of from 1 piece.