New car support for bomb of mesh and cambiador of filters of Nordson Kreyenborg
17 December 2013
A concept that combines cambiador of filters and bomb of gears in an alone mobile support simplifies the installation of these components in a line of extrusion, occupies less space in plant that the machines mounted separately and offers easy access for the replacement of the meshes, as it announced the past 16 December
The concept of a car of simple support, created on request of a customer, can apply to any team designed to measure by Nordson Kreyenborg for other companies, included processors of extrusion, formuladores of compounds and recicladores, and replaces the standard configuration with separate supports for cambiador of filters and bomb of gears.
The only car mounts in fixed wheels that allow the movement in transversal steering to go in and go out of the line of extrusion, while the movement ranged of precise form in the steering of extrusion provides by means of shimmer installed in the floor. At the same time, the linear guides in the car allow an independent movement in the steering of extrusion of the bomb of gears and the cambiador of filters. To save space and facilitate the access to change the filters, Nordson Kreyenborg turned the bomb of gears on his side so that his actuator could mount under the bomb.
“The use that Nordson Kreyenborg does of a common car for bomb of gears and cambiador of filters simplifies the installation of these components in the line of extrusion and allows a faster maintenance and easy”, affirmed Markus Walbersmann, engineer of investigation and applications. “The bomb of gears in this system incorporates the same characteristics of our team configured in shape traditional, included a system of cooling that improves the efficiency of the stamp of the threaded axis, that is particularly important for materials of low viscosity”.
The caudad of refrigerante is adjustable, and the refrigerante can be air or water desmineralizada. It asks to the customers that specify the refrigerante by anticipated so that Nordson Kreyenborg can design the bomb of gears with the end to obtain an exert optimum. If the material that goes to process is very sensitive to the shearing, Nordson Kreyenborg recommends his bomb of gears type 03 to minimise the time of residence.
