A new open house of DMG confirms the success of the formula

At the gates of the European fair of machine tools par excellence, DMG has not renounced contact with closest customers, which perhaps not may visit them at the EMO exhibition but do not fail them in their calls for open doors. That is why a few weeks held an open house with machines ecoline as protagonists, DMG reopened its doors. Since the company confirm Interempresas metalworking your bet for these events: "every time is more significant to do events aimed at a more specific type of clients." "The advantage of an open to a fair day is playing at home and you can better serve the customer". On this occasion also, told with the help of partners such as Tebis, Imcar, ERM, Renishaw and Castrol, that "we could give better coverage to all the needs of our clients and different sectors".

And despite the close proximity between the two events, the attendance was large and varied. From DMG made "very good balance, with good results in sales and new projects with large number of new offerings". Good news for the German mark before the EMO, which exhibits in Hall 2, stand A21. And is that, as we have from DMG Ibérica, "the situation on the market is better and progression, although very slowly".

All the exposed equipment, DMG wanted to highlight the 10 Ultrasonic milling and lathe Sprint 20, both very specifically targeted to treat topics for physicians.

10 Ultrasonic "designed to work in dental laboratories". Knowing the available space in dental laboratories rarely meets with industry standards, it was of great importance to minimize to minimize the size of the machine. Why not it takes more than 2 square metres to install a 10 Ultrasonic. Another feature of this team which takes into account the requirements of the dental technology is starting chips of the Ultrasonic, which also allows machining special hard and fragile as glass ceramics and synthetic materials. Of course, also metals demanding high-speed milling as the titanium and cobalt chromium, they are part of the wide range of usage of the machine.

The flexibility of the 10 Ultrasonic in selection of materials, is ranked for its versatility to produce complex geometries. Tilt rotary table integrated through - 15 ° to + 120 ° gives the machine of a 4th and 5th axis, allowing machining to negative degrees. The small PH2|4 automation unit offers inside space for other four racks of material raw without requiring extra space. When it is fully charged, this small automation system allows a production without operator for 60 hours. The great store linear PH 2|100 with integrated finished parts store also offers excellent space/tooling like the machine has very small dimensions of transport.

For its part, Sprint lathe "highlights its linear engine which offers greater accuracy". The tornos automatic DMG Sprint series linear offer a perfect combination of productivity and flexibility for series of short pieces with a maximum diameter of 42 mm. Linear technology, these machines provide not only a high level of dynamic performance with accelerations of maximum 1 g and rapid marches up to 40 metres per minute, but also an optimal direct measurement system accuracy. For example, the error of swing is only 4 µm, so diametrical tolerance within easy reach under H5. The additional Plus in productivity is achieved thanks to the concept of 'intelligent' machining with integrated into the main spindle and the Sub-spindle motores-husillo, both with axis and series, linear and up to 12 motorized tools tool. Thus it is possible that with a maximum of 3 tools and 6-axis be machined fully even the most complex pieces in a single operation. Up to 24 tools are available. When you end the machining, parts are transported directly outside the working area through the Sub-spindle, which dramatically reduces side times and guarantees a shorter piece times. The progress bar does not affect productivity, that simultaneously carried out the expulsion of the piece. Both the drive system of the CNC unit as Fanuc. The innovative technology of control of servomotors and digitally-controlled drives ensure processes of calculation accuracy and high speed data transmission. Also, the CNC unit uses a Windows interface that simplifies and helps the user with immediate and intelligible for automated programming functions and simulations of 3D machining cycles.