Hexagon Metrology Presents the new cabezales of measurement HH-To-T2.5 and HH-To-H2.5 for MMCs

The series of the new cabezales of measurement HH-To-2.5  of Hexagon Metrology present numerous innovations, for example an entirely integrated controller, the protection capacitiva against collisions, as well as the cinematic accommodation developed recently for solicitación extremely high.

The cabezales of measurement characterise , besides, by a system of accionamiento totally new, included toothed Hirth for the exact positioning of the sensor. This makes possible a high number of possible positions, as well as a quite high pair. The cabezales of measurement can mount directly in the MMC with a stem or a brida. Alternatively, it exists a version that in each MMC mounts with a pinola 80 mm. The sensors are installed with the union TKJ or HDKJ and can change manual or automatically. Here it is not necessary any recalibrado.

The cabezal of measurement Hexagon Metrology HH-To-T2.5 can indexarse in steps of 2,5° and like this adjust in 12.240 reproducible positions. The cabezal of measurement is instrumented with a cinematic element of union (TKJ). East makes possible, in combination with a Multi Wire, the connection to different sensors. The element of union can instrument with prolongations of until 450 mm.

The HH-To-H2.5 can indexarse in steps of 2,5° and turn in the Axis To ± 180°. Like this, it can adjust in 20.736 reproducible positions. It is instrumented with a cinematic element of union of high capacity of load (HDKJ), what makes possible, in combination with a Multi Wire, the connection to different sensors. The element of union can instrument with prolongations of until 750 mm. Like this, by means of the combination of a pair extremely high with the new adapter HDKJ can use, among others, sensors Non-Contact or Scanning far of the cabezal of measurement. This is not possible in the case of conventional devices.