Carl Zeiss Iberia, S.L. - Computer vision systems
Zeiss FalconEye
Optical sensor: it can use to measure with cabezales giratorios automatic
The optical sensor Falcon Eye of Zeiss can use to measure with cabezales giratorios automatic. This innovation turns it into an ideal system for complex measurements in the industry of the car. This sensor fulfils with the high requirements of precision and speed required in the inspections of quality and in the construction of bodyworks.
In addition to realizar a big volume of perforaciones, the manufacture of trucks also requires the measurement of singings, steps, threaded bolts and vehicles finished with pieces of setting. For the new vehicles, the distinct pieces have to be analysed quickly and with precision. The normative are very demanding and the inspections consume long, especially in the review of series. The system of optical sensor Zeiss FalconEye can incorporate to the cabezales giratorios indexables. This sensor uses in combination with the machine of three-dimensional measurement of horizontal arm Zeiss Carmet II.
To obtain the results of the measurement of agile and simple form, the sensor has to integrate properly in all the system. The cabezal giratorio automatic RDS-CAA is ideal because they only have to be calibrated some individual positions, although all the angular positions are available for the application.
The linear sensors laser, with individual lines, require that the line of the laser was perfectly ranged in relation to the surface of the piece. With the system Zeiss FalconEye this facilitates thanks to the use of an axis giratorio additional manual, with three possible angular positions with a repetibilidad of big precision. By all this, the Zeiss FalconEye provides big precision and rapidity in the work of the operarios of machine.
The FalconEye is optimised to integrate in the package of software Caligo of Zeiss. This contributes a group of tools of simple use to schedule paths and programming. Like result, the characteristic can be directly calculated and adopt as well as resulted in the evaluation.
In addition to realizar a big volume of perforaciones, the manufacture of trucks also requires the measurement of singings, steps, threaded bolts and vehicles finished with pieces of setting. For the new vehicles, the distinct pieces have to be analysed quickly and with precision. The normative are very demanding and the inspections consume long, especially in the review of series. The system of optical sensor Zeiss FalconEye can incorporate to the cabezales giratorios indexables. This sensor uses in combination with the machine of three-dimensional measurement of horizontal arm Zeiss Carmet II.
To obtain the results of the measurement of agile and simple form, the sensor has to integrate properly in all the system. The cabezal giratorio automatic RDS-CAA is ideal because they only have to be calibrated some individual positions, although all the angular positions are available for the application.
The linear sensors laser, with individual lines, require that the line of the laser was perfectly ranged in relation to the surface of the piece. With the system Zeiss FalconEye this facilitates thanks to the use of an axis giratorio additional manual, with three possible angular positions with a repetibilidad of big precision. By all this, the Zeiss FalconEye provides big precision and rapidity in the work of the operarios of machine.
The FalconEye is optimised to integrate in the package of software Caligo of Zeiss. This contributes a group of tools of simple use to schedule paths and programming. Like result, the characteristic can be directly calculated and adopt as well as resulted in the evaluation.
