This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Izar aporta novedades al sector industrial

The signature presents a new hand-held male, milling cutters of hard metal and plaquitas, among others

Izar Contributes novelties to the industrial state

Editorial Interempresas13/09/2012

Izar Cutting Tools present his new products, directed fundamentally to the industrial state, inside his politics of innovation and development of new solutions for his customers and users.

Between them, finds a hand-held male with profile of complete thread “that allows rentabilizar time and investment”. It treats of a new concept inside the world of the threaded, a hand-held male that is able to begin and finalise the thread by himself alone; this is, with an only male achieves desbastar, semiterminar and finalise entirely the thread. Under the reference 3023, is a hand-held male DIN 352, with entrance 4-6 threads, especially designed to work holes pasantes in thicknesses of until 1,5 mm and that achieves a long half/shaving. Range M3-M20.

New milling cutters of hard metal in desbaste

On the other hand, Izar follows betting by the innovation and with the technology of which has adds to his production the milling cutters of hard metal in desbaste. Like this, it presents the new references:

Ref. 9644: Strawberry of several teeth of hard metal (K30F) with possibility of coating X-TIALN, for desbaste fine of all type of steels, smelting and earn/bronze of short shaving. Range 6-20 mm.
Ref. 9647: Strawberry of three teeth manufactured in K30F (+X-TIALN) especially designed for the desbaste fine of stainless steels, in addition to apt for titanium and aluminiums with more than 10% of silicon. Range 6-20 mm.
Ref. 9413: Strawberry of a tooth of hard metal K10 and coating of polycrystalline diamond (PKD), thanks to l cual achieves a big performance (until 40% more) in all type of aluminiums (profiles), plastics, fibre of glass… Range 2,5-6 mm.

Plaquitas, portaplaquitas, avellanadores, machines sharpeners…

Likewise, Izar gives answer to the applications of his customers and users, completing his range of plaquitas of hard metal and carry, with the end to satisfy all the needs of the turning in this field.

Another important novelty constitutes it the reference 6575, an avellanador manufactured entirely in metallurgical dust sinterizado (PMX), that allows to work in steels and materials extremely hard like the Hardox, in addition to in stainless and termo-plastic. Range 6,30-25,00.

Finally, but no less important, Izar complete his family of machines sharpeners of broaches with the new model 500 (ref. 9994), with capacity of afilar broaches between 2,5 and 13 mm that have an angle of tip of 118-135º. It treats of a very versatile machine, valid for broaches of different material/uses like HSS, titanium, cobalt, hard metal, broaches of wall, etc.