News Info News

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Dos nuevas máquinas Haas saltan a la palestra en la BIEMH 2010
Stand: 1/F-34 G - 33

Two new Haas machines jump to the fore in the BIEMH 2010

Drafting Interempresas

15/04/2010
haas automation europe will take advantage of the twenty-sixth edition of the BIEMH fair to present machine two new tools CNC Spanish market: Haas DT, a drill and screw of high speed, released in 2009, and the ST-30, which is part of the new range of centers of turning performance of Haas. These new products demonstrate that, while the international economy has gone through one of the most difficult situations that are remembered, the California company has continued to innovate and invest to offer best CNC machine tools.

The DT-1 Haas has full capacity of milling CNC and undoubtedly represents one of the most interesting developments of the company. It has a workspace of 508 x 406 x 394 mm and a table with grooves in T of 660 x 381 mm A powerful cone ISO 30 15,000 rpm spindle allows Threading pieces at speeds up to 5,000 rpm. The DT-1 also comes with a 20 position tool changer and offers rapid advances of 61 meters per minute on all axes. Due to high rates of acceleration and deceleration, cycle times are low and reduce downtime. The DT-1 is the integrated CNC machine perfect for most busy general machining workshops.

New Haas DT-1
New Haas DT-1.

The new center of turning high-performance Haas ST-30, designed to provide power intensive Court, extreme rigidity and high thermal stability, it has a maximum capacity of Court of 533 x 660 mm and offers organizes maximum 806 mm on bench and 527 mm on transversal carriage. The typical configuration of the ST-30 includes a spindle with transmission gears of 22.4 kW, which provides a pair of Court of 1,139 Nm to 200 rpm and a maximum speed of 3400 rpm. Other features that improve productivity are an automatic tools transducer, motorized tools and a high pressure cooling system.

New center of high-performance turning Haas ST-30
New center of high-performance turning Haas ST-30.

Award-winning and practical machines CNC Haas continue to evolve with a series of new features designed to make the programming and management quicker and more effective. One of the new features that will be presented at the 2010 BIEMH is Program Optimiser, a system that records the settings in the variation of the speed of the spindle and the progress of work carried out during the cycle of the machineIt enshrines the activation and deactivation of refrigeration and the position of P-COOL and take notes during the cycle. Completion of the program, the operator press the F4 key and made settings are shown. When the operator chooses to accept the changes, Program Optimiser will edit the programme automatically with speeds, the progress of work and recorded notes, and will show what the original values in parentheses.

Change of tools of the DT-1 Haas
Change of tools of the DT-1 Haas.

Spain has two stores of the factory Haas (HFO): Easymill S.L., in Vitoria-Gasteiz, and Sogemec, in Madrid. Spanish Haas customers working in sectors such as automotive, wind turbines, elevators, power tools, aerospace, education, food and packaging and packaging. Currently, there are more than 500 CNC machine tools of Haas installed in Spain.

Suscríbase a nuestra Newsletter - Ver ejemplo

Password

Select all

Autorizo el envío de newsletters y avisos informativos personalizados de interempresas.net

I authorize the sending of communications from third parties via interempresas.net

He leído y acepto el Legal notice y la Data protection policy

Responsable: Interempresas Media, S.L.U. Purpose: Subscription to our newsletter(s). User account management. Sending emails related to the same or related to similar or associated interests.Retention: for the duration of the relationship with you, or as long as necessary to carry out the specified purposesTransfer: Data may be transferred to other group companies for internal management purposes.Rights: Access, rectification, opposition, deletion, portability, limitation of processing and automated decisions: contact our DPD. If you consider that the processing does not comply with the regulations in force, you may lodge a complaint with the AEPD.More information: Data protection policy

REVISTAS

VÍDEOS DESTACADOS

  • VOLLMER VHybrid 260

    VOLLMER VHybrid 260

  • MaxiChange: Sistema de cabezas intercambiables para torneado y ranurado

    MaxiChange: Sistema de cabezas intercambiables para torneado y ranurado

TOP PRODUCTS

NEWSLETTERS

  • Newsletter Metal

    25/06/2024

  • Newsletter Metal

    20/06/2024

Highlighted links

AMB24Aspromec - Asociación de profesionales para la competitividad del mecanizadoNebext - Next Business Exhibitions, S.L. - Advanced Machine ToolsEasyfairs Iberia - MetalMadrid

Latest news

Featured companies

OPINIÓN

OTRAS SECCIONES

Services