This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
AMH Herramientas, en la Biemh 2008AMH tools, in the Biemh 2008
February 10, 2008
The
AMH tools company exhibits several products: the self-centring gag OSV, claws parallel two- and three-JAWS's long career and versatile use EPOS, the unit of drilling DP-10, the new splitter plates, tables circulars and the jaw self-centring through rollers MAE.
Self-centring gag, drive hydraulic OSV
The autocentrantes JAWS OSV are used generally in machines with the goal of tying the pieces to be able to mechanise them.
The momentum of the force of tightening in the piece is determined by the pressure of a double acting piston incorporated into the clamp.
The cylinder the piston, which commands can be encapsulated inside the machine.
The transmission of the impulse from the shaft until the claws, is via an inclined plane.
The construction of the inclined plane docking allows a guide of great length. The elements are connected to ensure the opening movement / closure.
Parallel grippers three jaws, long career and versatile use EPOS
The parallel grippers OPE can set piece to manipulate external or internal. They are extremely versatile claws and they have been designed to offer the following advantages:
• Prismatic guides in steel treated to a prolonged mooring of pieces located within distance of the jaws with a slight loss of strength.
• The jaws are built so that you can place of mooring fingers on top or on the sides for versatile use.
• Mechanism of drive following the principle of inclined plane, which guarantees reliability and resistance to the parts subject to wear.
• Standard version with a long career of fingers and S version with reduced career and double strength of mooring.
• On the body of the claw are a series of slots for a precise lateral and axial with screws fixation and positioning guides.
• Control of position with built-in sensors (reed or inductive) that does not increase the size of the product.
• A plate protects the mechanisms of control of external contacts.
Optionally they can be requested with external proximity control of claws, using cylindrical detectors or threading, clamps and pin of sensor, a system of security with spring incorporated in the piston to maintain the position without pressure and a stabilizer system with dock for models of 3 fingers.
Unit drill DP-10
The unit of drilling DP-10 can be oleoneumática or hydraulic, with rotation of the spindle by electric motor. They are manufactured with runs of 50-100-150 mm, depending on version DP-10A, DP-10 c or DP-10 d.
The unit is end of career electric by the end of forward and backward. The regulation of the end of career of slow progress is made against top mechanic. The regulation of the total stroke of the fast forward and slow work, are independent. The thrust of labour is coaxial to the hydraulic brake, thus obtaining a perfectly centered development. The transmission of the spindle motor is done using trapezoidal pulleys, belts, toothed and slow racing, chains.
Splitter plates
Splitter plates are equipped with a cam mechanisms, designed to convert the rotary motion of the axis of the entrance to the intermitente-unidireccional movement of the output shaft. These mechanisms are characterised by octagonal pillars of input and output.
The movement is transmitted by a cylindrical cam adjusted to the axis of entry and attached to the detector of the roller on the output shaft.
The head in an index is composed of several bolts idle equidistant; the number of these, depends on the number of the station and the angle of the dislocation. The cam profile is designed to always have two recarga-rodillos in touch to take the slack: with the consequent improvement in accuracy and repeatability of the placement, reducing noise, vibration and reducing wear.
Self-centring gag through rollers, pneumatic and hydraulic
The autocentrantes JAWS MAE are used generally in machines with the goal of tying the pieces to be able to mechanise them.
The momentum of the force of tightening in the piece is determined by the pressure of a double acting piston incorporated into the clamp.
The cylinder which commands of the piston, can encapsulate inside the machine.
The transmission of the impulse from the central axis to the claws, is determined through an inclined plane to ensure maximum rigidity and precision.
The construction of the inclined plane seat allows a guide of great length.
Circular tables
The circular for Division of AMH tables can be installed in any position and are characterized by their rigidity and accuracy, both in hydraulic version (TA-325/H) as a pneumatic (TA-325/N). The first includes a pneumatic brake (30 kg) or water (250 kg). The working cycle, time or counterclockwise rotation, is done in four later controlled by four stages of career electric or pneumatic. Six M-8 holes provided on the rotating level allow fixed portable databases.