The Diputación Provincial de Cuenca drives more industrial land in the province
September 19, 2008
Urbanized industrial estates
· Polygon 'La Cabezuela', Cardenete: is located 65 km west of the capital of the province in the road CM-2109. It has a total area of 54.659 square metres with a minimum parcel of 1,250 square meters.
• Polygon 'El Horado Blanco', Las Pedroñeras: is located 110 km to the South of the provincial capital, on the eastern edge of wet La Mancha the road N-310 and the AP-36. It has a total area of 224.500 square meters and a minimum parcel of 675 square meters.
• Montalvo has two industrial areas: industrial area 'montalbo': is located 59 kilometers southwest of the capital of the province, in the region of La Mancha, next to the highway A-III. It has a total area of 800,000 square meters with a minimal plot of 400 square meters, and 'Sector 12', located 59 kilometres southwest of the capital in the province of La mancha, next to the highway A-III.
• Industrial area 'The Polonius', Quintanar del Rey: is located 91 kilometres to the South of the capital of the province in the comarca of the Manchuela of Cuenca, next to the road N-320. It has a total area of 120,000 square meters and a minimum parcel of 500 square meters.
• Industrial area 'Viñas de la Vega', San Lorenzo of the Grill: is located to the right of the Júcar river, 42 km to the southwest of the capital. It has a total area of 38,000 square meters and a minimum parcel of 375 square meters.
• Industrial area 'Which', Talayuelas: is located 110 kilometres southeast of the provincial capital, in the Conquense Sierra, at the apex of the provinces of Cuenca, Valencia and Teruel, next to the road N-330. It has a total area of 32.563 square meters and a minimum parcel of 250 square meters.
• Tarancón has five industrial areas:' Tarancón 1-4, 1-7, 1-9' with 498.345 square meters, ' Tarancón N-III' with 760,000 square meters, 'Path of the shepherds' with 869.109 square meters, ' tarancón sau I-11' with 130,000 square metres and 'Tarancón South' with 368.768 square meters.
· Industrial area 'villaescusa de haro', 94 kilometres southwest of the capital with the N-420 (Córdoba-Tarragona). It has a total area of 68.250 square meters and a minimum parcel of 500 square meters.
• Industrial area 'San Sebastián': 90 kilometers to the South of the provincial capital in the region of La mancha with the CM-310. It has a total area of 39.536,36 square meters and a minimum parcel of 250 square meters.
Basin stands out for its location as a platform for access to the Madrid-Valencia axis and to the Northeast and peninsular South due to infrastructure as the AVE Madrid-Valencia or the motorways A-40 and A-43
Industrial estates in course
• Industrial estate 'belinchón': 86 km to the West of the capital. It has a total area of 78.148 square meters and a minimum parcel of 500 square meters.
• Industrial zone 'Campillo de altobuey': 62 km with an area of 86.908,58 square meters and a minimum parcel of 750 square meters.
• Industrial area ' S-7, S-8, S-9, S-10 and A-4', basin: geographic center of an extensive provincial territory with important agricultural, forest and livestock resources, is situated at the midpoint of the line that links the capitals of Madrid and Valencia, next to the highway A-40N-320, N-400, and N-420. It has a total area of 1,277,000 square meters.
• Industrial zone 'El provencio': 81 kilometers south of the capital in the region of La mancha Conquense, next to the road N-301. It has an area of 43.560 square meters.
• Industrial zone 'Fuente de Pedro naharro': 87 km south of the provincial capital near the road CM-200 in the natural region of the Valley of the Conquense Mancha Riansares. It has a total area of 266.045 square metres and take care of a plot of 1,425 square meters.
• Industrial zone 'El Pino', Horcajo de Santiago: 100 kilometers southwest of the province of Cuenca, in the autonomous community of Mancha Alta, between the motorways of Levante and Andalusia. It has a total area of 213.217 square meters with minimal plot of 800 square meters.
• Industrial zone 'iniesta': 94 km to the South of the capital in the region of the Manchuela of Cuenca, next to the road N-310. It has a total area of 153.994 square metres with a minimum parcel of 200 square meters.
• Industrial zone 'Cooperative of garlic' and 'High road', La Alberca de Záncara: 81 kilometers south of the capital of the comarca of the Cuenca Mancha Baja, next to the road CM-3110. total surface area of 153.994 square metres and minimum parcel of 200 square meters.
• Industrial area 'The taray', the officers: southwest of the province, 115 kilometers from its capital, in the comarca of La Mancha, Cuenca, limited to the West and South by the provinces of Ciudad real and Albacete. It has a total area of 37.663 square meters, not given minimal plot.
• Industrial areas 'z7-z8-z9' in Motilla Palancar: 68 kilometres from the provincial capital of the comarca of La Manchuela Cuenca, along with the A-III (Madrid-Valencia). With a total area of 1,100,000 square meters plot not established minimum.
With the Pact for development and the competitiveness of Castilla - La Mancha, Cuenca offers entrepreneurship a range of entities and supports encouraging investment in the area
• Industrial zone 'priego' located 56 km north of the capital opening the way to the Cuenca mountains from the Alcarria. With a total area of 125,000 square metres, with a minimal plot not established.
• Industrial zone 'San Jose' at San Clemente (enlargement in second phase): 90 km from the capital along the road N-310, on the banks of the River Rus in the region of la Mancha. With a total area of 52.861 square meters and a minimum without determining plot.
• Industrial area "La Losilla' in Sisante: 100 kilometers from the capital in the Manchuela Conquense region next to the A-31 motorway (Madrid-Alicante). With a total area of 196.756 square meters and a minimum parcel of 500 square meters.
• Industrial zone 'valverde de Júcar': 44 km to the South of the capital, in the comarca of la mancha, on the banks of the reservoir of Alarcón on the Júcar river. With a total area of 47.198 square meters and a minimum parcel of 700 square meters.
And communications infrastructure
In the field of transport infrastructure are the Ave Madrid-Cuenca-Valencia and the corridor of the A-3 Madrid-Valencia motorway. Advanced is also the A-43 which, starting from the South of the province, it will give access to Andalusia. The highway of Castilla-La Mancha, A-40, contact Northeast Teruel (axis basin-Sagunto-Somport) and the Southwest by Maqueda and Ávila passing through Toledo basin. It is expected the imminent construction of the highway from the Alcarria (Tarancón-Guadalajara) and, to the Southeast, the Cuenca-Motilla of the Palancar-Albacete.