This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Nuevo concepto de células estándar compactas de paletizado

Inser Robotics improves the system of cargo movement

New concept of standard cells Compact of palletizing

Drafting PU26/11/2007

Inser Robotics, in his desire for continuous improvement and innovation, has developed a new concept of standard pallets thanks cell which allows to significantly reduce both space occupied as the time of installation and commissioning.

With a capacity up to 900 real cycles per hour, are cells of high-performance, widely overcome teams much more expensive.

The main novelty of this new concept is the integration of all elements of the cell on a common reference, so installation is very simple, being able to even make the final client without the intervention of technical personnel from Inser robotics.

Thus, this type of compact cells may be provided 'boxed', so that is the final customer which install and put in place following the steps described in a manual of mounting supplied with the cell.

Being standard configurations in which only the robot gripper (which may be any of the existing in our catalog claws or a special gripper designed to adapt to the characteristics of the product to be handled), significantly reducing costs of project and the Assembly and start-up of the robotic system, so that we can offer a very competitive price.

In all cases, and before boarding, the company operates in its facilities testing of the cell with the products to palletizing, to verify its correct operation. In all cases given the cell programmed with the piece of reference.

Also, and if the client don't want to connect and set up his cell itself, you can hire Inser Robotics this service as well as a training course or even the programming of more references, etc.

The new cell improves the times of palletizing.

The cells are designed based on two basic models of robot, each of them configurable to meet one or two posts of palletizing with the same robot, according to the following description:

Cell of a single seat of palletizing

Indicated for space-constrained locations and not very high production rates as that creates an interference on the cycle of the robot ends a pallet and this must be evacuated and replaced by a new pallet. The orientation of the entry of product and the input/output of pallets can be configurable depending on the distribution in plant production lines.

Cell of two posts of palletizing

In this configuration there is no interference with the change of pallet as the robot can continue to work in the other post when it finishes palletizing in one of them.

These two basic models can be modified or expanded to accommodate the specific needs of each customer through different types of claws; barrier muting instead of doors; software generation of mosaics; auxiliary keypad for rearmament; put separators cartons; and food and automatic disposal of pallets by conveyors.

Also, the advantages of this new concept are summarized in its high reliability, the standardization of the quality in the end of the line, its ease of handling, reduced space it occupies and the convenience of transfer. Also guarantee cycles high (up to 900 real cycles per hour) and it is easy to reschedule for reference changes.