This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Metalúrgica Cerrajera de Mondragón en Ferroforma / Bricoforma 2009Metallurgical Cerrajera de Mondragón in Ferroforma/Bricoforma 2009
March 2, 2009
In Hall 1, stand F31-G32,
MCM presents developments both in the field of the electronic lock, thanks to the new ST40 access control system, as in the field of the mechanical lock with the launch of the Tribulones locka new lock high security entrance of 70 mm.
On his new ST 40 Access Control system is based on a new electronic lock for proximity, which is the real 'heart' of the system of access control. The system allows you to organize and control a facility by restricting or allowing access, recording movements, demarcated areas, setting time zones, etc. This system applies to any facility or building requiring access control, regardless of whether much transit (residences, hospitals, airports…) or moderate traffic (offices, buildings privados…). The operation of the lock system is based on modern RFID (radio frequency identification) technology. The doors are opened without contact, simply presenting the electronic key or card to the antenna of reading. Communication between the key and the lock sends information to the system without the need for complex cabling.
As to the new high security lock Tribulones the traditional 4 bolts being replaced by 3 bolts of greater thickness and new design. The security is greater, both in physical presence and the amount of projected material. This change in bolts is accompanied by a new system of operation of the lock. Thus the four laps of key needed to achieve the maximum projection of the pins, features in locks of 70 mm, replaced only by three laps. The improvement in security is real because the projection of 36 mm of the pins attached to the new design of the same guarantees a greater resistance to leverage front and side of the lock.
Related Companies or Entities
Metalúrgica Cerrajera de Mondragon, S.A.