This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Una tecnología innovadora para un tablero de a bordo de un coche
Technology for a Board of on Board of a car
06/06/2001
on June 6, 2001
Italtech (represented in Spain by Centrotécnica) has delivered an important Spanish transformer, provider of leading manufacturers of European automobile, an injection machine KS series, with the closure of two dishes, 2,000 metric tons of force closure and two groups of injection mounted on movable bedwhich allow injected a thermoplastic and elastomer a successively into the same mold, both by the focal point of injection. Here is a standard setup many times produced for different applications. The peculiarity lies in the capacity of this machine for longitudinally displace half of the mold on the plate fixed, with a weight of about 30 T, in a few seconds and with the precision of relocation of the same that is required. The work is a double injection within a mold with one male and two different females, who for reasons of aesthetics and quality of the piece does not allow one on direct injection.
The injected piece in elastomer is fixed in the male on the mobile plate and open, double the fixed plate mold moves to change the figure and once closed the machine again, inject the thermoplastic. Throughout the cycle, double opening and closing, displacement of the mold and displacement of the two injectors is carried out in less than a minute to get a Board onboard for car of excellent finishing and mechanical properties.
Related Companies or Entities
Centrotécnica - C.T. Servicio, S.A.
