High-tech in the dehumidification with Duga Drytech
Dehumidification of small and medium-sized quantities of polymers is their natural response in the series of dehumidifiers DD30 and DD60 of Duga, distributed in Spain by C.T.Servicio-centrotecnica. It's a compact module of dehumidification system that can be easily installed on site processing to the minimum essential space or be also installed on it. These dehumidifiers have of a cartridge only silicates, and if the installation this well dimensioned, is possible to reach a point of dew, or Dew point easily up to - 40 ° C. Also for this series, the temperature of process of dehumidification control is ensured through the system of the microprocessor, with display in the control panel; as well as the eventual alarms in course. The regeneration of the silicates is fully automatic, cycle times are customized by the manufacturer for each machine, by comparing the model of dehumidifier with the hopper capacity that will be combined to obtain the maximum performance with lower power consumption. The return of hopper air undergoes a treatment of pre-enfriamiento, through an exchanger air-water upstream, thereby increasing the performance and the duration of the silicates.
The original graphical control panel makes it easier for the operator the imposition of the optimum temperature for process, indicating also the minimum length of stay for a good dehumidification of each material. On the other hand, the dehumidifiers Duga Dry Tech in the series DD, deshumidifican air of the hoppers for drying granule with a dew point according to the size of the installation and the requirements of the customer, can reach a point of dew (Dew Point) from - 45 ° C. With special versions it is possible to reach a point of dew of - 55 ° C. Control of the temperature of process and the process of dehumidification, is also assured by the system of microprocessor Duga.
The main features of dehumidification Dry Duga Tech teams are:
• Control by microprocessor.
• Fully automatic working cycle.
• Cartridges widely sized silicates.
• Mechanical thermostats of security on the main controls.
• Cartridge on the return air filter.
• Car transport tolva-deshumidificador.
• Valves of liquefaction for via additional.
• Clock programmer, daily or weekly.
• Has operating hours (to establish a change of silicates).
• File with 34 dedicated and specific work programmes for each material.
• Pre Cooler exhaust air.
• Process of high-performance and flow turbine.
• Easy filter cleaning.
• Operation managed by PLC program.
• Cycle of regeneration with humidity probe
• Version with Dew PQINT - 55 ° C.
