Special sobremoldeo in continuous processes

Often, these large machines injection vertical of the German manufacturer Boy, represented in Spain by Centrotécnica, are used to manufacture products in continuous; through transfer or guided production chains. Typical examples of application is the manufacture of conveyors mechanics of discs of plastic that are injected to ropes or chains. These mechanical conveyors are used for the transport of material loose through tubes (conveyor mechanic of animal food or pellet), and the parties are willing to take. The fall in prices of these parts or elements is very important, which makes the choice of this with Insert moulding machine, which stands out for its low consumption of energy is ideal.
Another interesting example is the manufacture of diamond cutting wire, portable tools that respond to the demand of the sector of the stone, but also in the construction industry, in which the blocks of marble or granite are cut with special steel wire. These wires are sometimes equipped with rings of carbide at defined intervals. The circumference of each ring weapon with industrial diamonds. Closure between the ring and the wire is applied with Insert moulding machine.
A third example is the economic production of cordage of plastic for Venetian blinds or decorative purposes. Using moulds with large numbers of cavities. The advantages of the 55VV Boy for this application are numerous. The cord or chain which shapes with insert can be easily supplied by large reels in the structure of the machine and feed through the mold from the rear. The area of mould is freely accessible from the rear, which is not possible in the machine's structure type C. In addition, wires can feed into the mold easily from the side, the distance between the columns is generous and the side of the ejector of the mold is always in the same position. With the rings of carbide inserted, move the sleepers of mould more below would dangerous.