Instrumentos Testo, S.A. - Gas and combustion analyzers
Testo 350
Analyser of products of the combustion: laptop with menus of measurement preajustados
Testo Has developed an analyser of products of the portable combustion with menus of measurement preajustados that guide to the user and facilitate until the most professional measurement. The testo 350 is the ideal analyser for, for example, the set up, the maintenance and the measurements of operation in industrial burners, turbines of gas, industrial motors or systems of cleaning of the gases of combustion, as well as measurements of the broadcasts of gases to the environingingment in ovens.
Besides, the testo 350 is an instrument of support for the control and the monitoring of value them official limit of the environingingmental broadcasts and for the tests of operation of fixed measurement instruments of broadcasts.
The possibilities of configuration of the analyser are multiple: the testo 350 more basic consists in a unit of control, a box analizadora and a probe of taking of samples of gas. The handle of the box analizadora carries out with the unit of control (independent or in direct connection to a PC via USB or Bluetooth 2.0). The unit of control can separate of the box analizadora, by what the transfer of data between both elements can do although the point of measurement was separated of the point of adjust, of particular use provision if it works with industrial burners. The user configures the procedure of measurement in the unit of control and the box analizadora effects the measurements and memorises the values automatically, which go appearing in the graphic screen to colour of 3,5” of the unit of control.
The user can configure menus of specific measurement for each application, already was burners, turbines of gas, or industrial motors: like this, in the visualizador show the most usual fuels and the parameters of the PdC more notable.
The information showed in screen guides to the user through each measurement, by what do not need previous knowledges to handle the instrument. The difficulties of habituación to a new analyser remain minimised, the testo 350 anticipates the measurements.
Resistant design adapted to the industrial standards:
To protect the instrument, facilitate his use in aggressive surroundings and avoid frequent repairs that suceden when the instrument litters a lot and penetrate odd bodies, has provisto of measures of innovative protection: the lines of cooling are closed and isolated of the electronics equipment dealers equipment dealers and the sensors of the analyser of the external pollution; the connectors, zócalos and plugs are of the type bayonet, by what any wire remains connected of safe form and avoid the wrong measurements because of tugs or unwanted disconnections.
A technologically advanced instrument no serious useful if it was not economically efficient. The selection of the type of application in the measurement comports the independent protection of the the sensors in case of concentrations of gas extremely high and the automatic programming of the times of measurement and cleaning of the box analizadora, allow to accelerate the routine works of the day in day out.
It covers it of maintenance in the inferior part of the instrument allows a fast access to the susceptible pieces of replacement like sensors and filters so that these can replace in situ. Of course, these pieces can replace them the user without need to send the instrument to the technical service of Testo.
Besides, the testo 350 is an instrument of support for the control and the monitoring of value them official limit of the environingingmental broadcasts and for the tests of operation of fixed measurement instruments of broadcasts.
The possibilities of configuration of the analyser are multiple: the testo 350 more basic consists in a unit of control, a box analizadora and a probe of taking of samples of gas. The handle of the box analizadora carries out with the unit of control (independent or in direct connection to a PC via USB or Bluetooth 2.0). The unit of control can separate of the box analizadora, by what the transfer of data between both elements can do although the point of measurement was separated of the point of adjust, of particular use provision if it works with industrial burners. The user configures the procedure of measurement in the unit of control and the box analizadora effects the measurements and memorises the values automatically, which go appearing in the graphic screen to colour of 3,5” of the unit of control.
The user can configure menus of specific measurement for each application, already was burners, turbines of gas, or industrial motors: like this, in the visualizador show the most usual fuels and the parameters of the PdC more notable.
The information showed in screen guides to the user through each measurement, by what do not need previous knowledges to handle the instrument. The difficulties of habituación to a new analyser remain minimised, the testo 350 anticipates the measurements.
Resistant design adapted to the industrial standards:
To protect the instrument, facilitate his use in aggressive surroundings and avoid frequent repairs that suceden when the instrument litters a lot and penetrate odd bodies, has provisto of measures of innovative protection: the lines of cooling are closed and isolated of the electronics equipment dealers equipment dealers and the sensors of the analyser of the external pollution; the connectors, zócalos and plugs are of the type bayonet, by what any wire remains connected of safe form and avoid the wrong measurements because of tugs or unwanted disconnections.
A technologically advanced instrument no serious useful if it was not economically efficient. The selection of the type of application in the measurement comports the independent protection of the the sensors in case of concentrations of gas extremely high and the automatic programming of the times of measurement and cleaning of the box analizadora, allow to accelerate the routine works of the day in day out.
It covers it of maintenance in the inferior part of the instrument allows a fast access to the susceptible pieces of replacement like sensors and filters so that these can replace in situ. Of course, these pieces can replace them the user without need to send the instrument to the technical service of Testo.
