Schlüter Systems, S.L. - Other drainage systems
Schlüter Troba
Esterilla Of drainage: for the desaguado of the impermeabilización
Schlüter-Troba Is a drainage of surfaces sure and durable to place on waterproofing solutions horizontal with throw off balance. It consists in an ironinging of pivotes of polietileno of trapezoidal form, drilled and resistant to the pressesure, that creates concavities abovedadas between the impermeabilización and the soldier. The water filtered that penetrates by the construction of the layer can happen through the lateral holes of the pivotes until the impermeabilización situated in the desnivel and from there happen free of pressesure to the concavities abovedadas for the drain.
Schlüter-Troba Consists in an ironinging of polietileno of stable form with a trapezoidal structure and pivotes of 8 mm of height. For the step of the water that penetrates exist holes in the pivotes of the external corners. The surface of support of the ironinging on which are the pivotes is of the 50 %, the 50 % remaining is built in shape of vaults for the drainage. The material does not rot and is stable to temperatures from -40 °C until 80 °C.
Schlüter-Troba Consists in an ironinging of polietileno of stable form with a trapezoidal structure and pivotes of 8 mm of height. For the step of the water that penetrates exist holes in the pivotes of the external corners. The surface of support of the ironinging on which are the pivotes is of the 50 %, the 50 % remaining is built in shape of vaults for the drainage. The material does not rot and is stable to temperatures from -40 °C until 80 °C.
