Hall 16, stand B47
Maplan Participates in offering solutions for the chain of process automated in the technology of the elastomers
20 September 2013
In the technology of the elastomers, the transformers sue more solutions of efficient system. Under the name ‘Karousel', six companies associated of Austria and Italy expose in the K 2013 a chain of process ‘transalpina' for pieces of closing in elastomer. Transformers of all the world have the opportunity to study a chain of complete process: from the development of boards of rubber by means of machines and moulds until measures of guarantee of quality (GC) like the improvement, the optical final control and the automatic final classification.
The core of the conception of the installation is a machine for moldear of injection MHF700/300XL editionS of Maplan Austria, represented in Spain by Coscollola Commercial, and a mould of 4x54 cavities of the manufacturer of Italian moulds ORP Stampi with a technology of injection of 4 cold channels. To be able to send the correct boards, has included a final control of GC in the concept of installation. Rudolf Eisenhuber, technical boss of Maplan, says in this regard: “The aim is to show where find the potentials of the improvement of the own value added in all the areas of the chain of process, from the elastomer until the manufacture and the GC. Besides, the conception of the installation offers an overview of a continuous production until a production with zero defects”.
For together tóricas and elements of sealed, as well as also for high capacities of injection of until 1200 ccm: MHF700/300XL editionS of Maplan.
The high level of quality that attributes him to the mould also self-evident in the technology of the machine. The machine for moldear by horizontal injection MHF700/300XL editionS of Maplan has of some special equipments of the kit modulate for the process of moldeo by injection. To part of a high reproducibility and capacity of injection, the unit of dual injection Fifo also has of a movement of the filter and now can achieve also in '1200-ccm of execution'. The conception of power of propulsion corresponds to the standard device 'Cool Drive II'. A very short filter provides the pressesure of maximum injection directly in the channel frio. The operator can handle all the parameters of process of the machine of transparent form to través and the interface of user of 5ª generation. The high precision and the system FIFO join up with energetic efficiency and with little effort of maintenance. Also it offers the possibility of a change of material or of colour in case that it was necessary. The inner diameter of the machine expands 850 mm, whereas the minimum height of molding of 40 mm remains the same.
Related Companies or Entities