This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Las articulaciones BJT y horquillas FJT en tecnopolímero, novedades de Elesa Ganter en Enomaq
The BJT joints and forks FJT in made, Elesa Ganter in Enomaq news
02/02/2011
February 2, 2011
Elesa Ganter Iberian Enomaq 2011 (Hall 2, stand D/36) presents its new range of joints and forks in made. BJTS are joints whose body is made of made and the field in high polyamide. Presented in two versions, with internal thread and threaded axis. FJT elements are heads of forks made in made, which is presented in two versions, with bolt and safety clip and a second version with rebuttable bolt of spring.
The advantages that offer us these elements, BJT and FJT, are: savings up to 80% by weight; 100% free lubrication; 100% free of maintenance; absorption of vibrations; resistance to corrosion even in the presence of chemical agents; compensation for any loss of alignment; noise reduction; a 50% reduction in costs and very high resistance to fatigue with varying loads.
Forks FJT and BJT joints of Elesa Ganter.
The articulated heads and forks absorb high loads with normal ambient temperatures, have buffer properties and weigh only one-fifth of which weigh the traditional metallic bushings covers. Especially with permanent charges and high temperatures should verify, in each particular case, the ability to load with a trial close to the actual conditions of application.
Related Companies or Entities
Elesa Ganter Ibérica, S.L.
