This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Haas Automation en la EMO 2007

Ver más artículos sobre: Spain ranks sixth among countries participating in the EMO

Haas Automation at the EMO 2007

26/11/2007

The stand of 1,650 square meters of Haas Automation Europe (HAE) at the EMO exhibition displays more than 40 tools CNC machining of newest Haas (for cutting) and seven exposure units that will be practical demonstrations of Haas and CNC dividing tables indexed dividers. HAE also exposes machinery in up to 10 of the stands of the partners that will participate in the fair, which include Renishaw metrology company, manufacturer of tools Urma Switzerland and manufacturer of husillos IBAG.

In addition to a wide selection of machines of the wide range of Haas in continuous expansion, are also exhibited many new products, which include:

VF-3YT compact vertical machining center

Vertical machining center compact VF-3YT cone ISO 50, recently launched on the market, which presents a work environment of 1.015 x 660 x 635 mm (152 mm rather than the standard Haas VF-3) and a table of 1,320 x 585 mm The route of the axis and expanded is achieved through a greater casting base; Despite this, the surface occupied on floor of the new machine is only slightly higher than the of the VF-3 standard. Like all Haas ISO 50 Cone (VMC) vertical machining centers, the VF-3YT/50 is equipped as standard with a dash of tools of lateral mounting of 30 positions and a system of spindle head with transmission gears of 7,500 rpm22.4 kW, which generates up 610 Nm of torque. Series benefits include a chip extractor endless automatic, a nozzle coolant programmable, a LCD color monitor of 380 mm with USB port, a wheel of advance in remote command and the system of programming Visual Quick Code of Haas.

VF3YT.

VF-5SS

It is a new addition to the popular line of VMC Super Speed of the company. The new machine is a center of vertical machining of high-performance designed for high-volume production and other work in which the high speed and the short duration of the cycles are important. Comes standard with an innovative direct drive 12,000-rpm spindle, a fast and ultrafast tool changer of 30.5 m/min. Based on the Haas VF-5 platform proven in workshop (tours of 1.270 x 660 x 635 mm), the VF-5SS raises the concepts of performance and affordable price to a whole new level. This machine is provided with a spindle ISO 40 cone that spins at 12,000 rpm, with a system of exclusive direct drive that couples the motor directly to the spindle. This smooth running system is very efficient, quiet and stable, from a thermal standpoint. Vector drive system double of 22.4 kW spindle provides a high torque at low speed, as well as the necessary speed for high-speed machining. Ultrafast switching estrella-triángulo provides a wide band of constant power. VF-5SS also includes a changer of tools of lateral Assembly of 24 positions of high speed, changing a tool to another in just 1.6 seconds. To further reduce the duration of the cycles and to minimize the time without mechanization, VF-5SS uses spindles of ball bearings with high-pass and high torque servo for rapid of 30.5 m/min. Other high-productivity standard features include 1 MB of memory for programming, rigid threading and immersion of 208 liter cooling system.

Toolroom Mill TM-3 p

The latest addition to the range of Haas of small machines is the Toolroom Mill TM-3 p: a machine of low-cost with the speed and flexibility of full CNC. Based on the popular Haas TM-3, the new machine features higher speeds, an automatic tool changer and a full fairing. The thoughtful and practical design are key characteristics of all the Mills Toolroom of Haas. The reliable regulatory type spindle vector of the TM-3 p of 5.6 kW runs at 6,000 rpm and leverages tools cone 40 ISO standards. The rapids and progress on cutting speeds are 10 m/min, double the not on TM-3. The routes of the machine of 1.015 x 510 x 405 mm and a table with "T" of 1.465 x 370 mm grooves provide a broad space for the subject of pieces and repositioning of larger pieces. 10 Positions tools changer is standard.

TM3P2.

EC-630

The newest horizontal machining of Haas Automation, EC-630, Center constitutes the last enlargement of the range of solid high productivity of the company (HMC) horizontal machining centers. EC-630 is the machine of high productivity with higher capacity that Haas has produced throughout its history. Presents a working environment of 1.015 x 840 x 890 mm, a spindle cone head with transmission gears, a double dash of pallets with pallet of 630 mm, a dash of lateral mounting of 50 positions and 1 integrated degree pallet indexing divider tools ISO 50 (fourth available complete axis). The transmission of nuts and bolts of the EC-630 head coupled engine directly to the spindle through gearbox of high precision manufactured by Haas. This smooth running system is very effective and offers an exceptional thermal stability. Two-speed gearbox provides 610 Nm of torque for the Elimination of much material and speeds of up to 6,000 rpm to finish last. Each of the 630 mm machine pallets bears a burden of 1,200 kg and the servo-driven pallet changer makes the change of pallets quickly. A separate and protected workstation allows the operator to load and download parts or change the work in a pallet of safely while she is machining parts in the other pallet, which is maximized so the time of activity of the spindle. The area of work of the machine hosting parts of up to 1,000 mm of diameter and height.

At the end of May 2007, Haas Automation celebrated the installation of your machine number 75,000, which marked another important milestone on its way to become the leading global manufacturer of CNC machines (by volume).