Maquinaria Curvaser, S.L.U. - Automatic welding equipment
Varo SARG-1600
Machine for welding: of meshes and semi-automatic
The semi-automatic machine of Varo model SARG-1600, represented by Machinery Curvaser, S.L., it is for the welding of meshes,with or without frame, and meshes of commercial type of measure normalised.
It treats of a machine of high degree of reliability, advised for productions of half and high series.
Between his main characteristic technicians stands out that the useful maximum width of the mesh is of 1.600 mm, whereas the long useful maximum of the mesh is of 2.000 mm. The transversal minimum step of the mesh is of 10 mm and the longitudinal minimum step of the mesh is of 10 mm. It has of eight cabezales of welding.
The power of the transformers of welding is of 100 kW and the installed electrical power is of 410 kW. It incorporates four transformers monofásicos at the same time that has an electrical supply of 400 V, trifásica, and of 50 Hz. The maximum number of longitudinal wands is of 32.
The time production with four cabezales is of 80 to 100 weldings/min, whereas with more than four cabezales is of 60 to 80 weldings/min.
The composition of the machine consists of group of feeding of longitudinal wands, group of introduction of wands in welding and group of welding. Also it has of group of feeding of transversal wands, group of advance of mesh soldered, multiple feeder newspaper, descargador automatic and group recortado side.
It treats of a machine of high degree of reliability, advised for productions of half and high series.
Between his main characteristic technicians stands out that the useful maximum width of the mesh is of 1.600 mm, whereas the long useful maximum of the mesh is of 2.000 mm. The transversal minimum step of the mesh is of 10 mm and the longitudinal minimum step of the mesh is of 10 mm. It has of eight cabezales of welding.
The power of the transformers of welding is of 100 kW and the installed electrical power is of 410 kW. It incorporates four transformers monofásicos at the same time that has an electrical supply of 400 V, trifásica, and of 50 Hz. The maximum number of longitudinal wands is of 32.
The time production with four cabezales is of 80 to 100 weldings/min, whereas with more than four cabezales is of 60 to 80 weldings/min.
The composition of the machine consists of group of feeding of longitudinal wands, group of introduction of wands in welding and group of welding. Also it has of group of feeding of transversal wands, group of advance of mesh soldered, multiple feeder newspaper, descargador automatic and group recortado side.
