OPQ Systems Maquinaria Gráfica, S.L. -
Horizon Taurus 530SF
Laminadora Automatic: with automatic feeder
The company OPQ Systems, specialist in equipment of finishing, presents the laminadora automatic Horizon Taurus 530SF of format 53 cm with automatic feeder.
The Taurus 530SF, has of an automatic feeder of high capacity, instrumented with cabezal back of feeding of high provision, unit of laminado of high precision with accionamiento pneumatics and device of cutting and separation. Optionally it can install to the exit a jogger or a descargador of palet for big productions.
The adjust of the laminadora is very simple, only is necessary to enter in the tactile screen the measure of the paper to laminar and position the cabezal back of feeding.
All the functions of laminación realise through the tactile screen to colour, of operation very intuitive. The laminadora Horizon Taurus 530SF, can laminar to the two faces, the maximum measure of the paper is of 53 cm. Of width, the maximum speed of laminado is of until 30 metres/minute. The time of warming is of only 10 minutes.
The Horizon Taurus 530SF possesses a device of reacondicionamiento of the roller of rubber, which lengthens the useful life of the same and also possesses a device of optimisation of warming of the roller calefactor. This device uses to avoid heat the zones of the roller calefactor that do not use when the measure of the paper is inferior to the maximum measure.
Like option, the Horizon Tarus 530SF, has of a loaders and apilador of palé, for big productions. With this loaders, can feed the laminadora directly from a palet, reducing like this the times of load.
The Taurus 530SF, has of an automatic feeder of high capacity, instrumented with cabezal back of feeding of high provision, unit of laminado of high precision with accionamiento pneumatics and device of cutting and separation. Optionally it can install to the exit a jogger or a descargador of palet for big productions.
The adjust of the laminadora is very simple, only is necessary to enter in the tactile screen the measure of the paper to laminar and position the cabezal back of feeding.
All the functions of laminación realise through the tactile screen to colour, of operation very intuitive. The laminadora Horizon Taurus 530SF, can laminar to the two faces, the maximum measure of the paper is of 53 cm. Of width, the maximum speed of laminado is of until 30 metres/minute. The time of warming is of only 10 minutes.
The Horizon Taurus 530SF possesses a device of reacondicionamiento of the roller of rubber, which lengthens the useful life of the same and also possesses a device of optimisation of warming of the roller calefactor. This device uses to avoid heat the zones of the roller calefactor that do not use when the measure of the paper is inferior to the maximum measure.
Like option, the Horizon Tarus 530SF, has of a loaders and apilador of palé, for big productions. With this loaders, can feed the laminadora directly from a palet, reducing like this the times of load.
