Maquinaria Curvaser, S.L.U. -
Varo PTE
Dobladora Of wand: it characterises by his extreme ease of management
The dobladora of wand model PTE of Varo represents an important variety in the wide program of manufacture of machines for the work of the wand.
This machine differentiates by the extreme ease of management and the big versatilidad in the realisation of pieces in two dimensions.
It is instrumented properly, can realise freamers with square forms, rectangular, oval, rings, etc., weldings of tope and irregular pieces.
The advance and shrinking realises by means of an electromechanical group accionado by engine controlled type brushless, rollers of drag in steel treated rectified for different diameters of wand.
The cut, accionado by hydraulics cylinder, results totally independent of the electronic axles.
The axles of bent are accionados by motors type brushless with precision centesimal that guarantees a high precision with regard to the tolerances admitted.
The PTE also can instrument with supplementary units of work like presses, cabezales of punzonado, cabezales of marked, etc.
The software of the PTE of extreme simplicity allows to realise, quickly, change of pieces, forms, angles and radios of curvado, so that the operario, after a short time of learning, can handle the dobladora, safe and effectively.
Between his technical characteristics fits to stand out that the minimum diameter and maximum of the wand is of 2 to 8 mm. The length of the wand does not have limitations. The maximum speed of the advance of the wand is of 80 m/min.
The cabezales of curvado have a minimum and maximum radius curvado with perno of 2,5 to 16 mm, and a minimum radius of curvado by generation of 15 min. The precision of the axles X, And, Z is of ±0,05 mm. It realises the time rotation and antihoraria of ±300°.
The time of programming is of 5÷10 minutes.
The time for the put in production with change of diameter of the wand is of 30 min and without change of diameter of the wand is immediate.
The installed electrical power is of 48 kW.
The dimensions of the machine with protections are of 320 x 155 x 190 cm, and the dimensions of the electrical picture are 60 x 70 x 175 cm. His weight is of 2.500 kg.
This machine differentiates by the extreme ease of management and the big versatilidad in the realisation of pieces in two dimensions.
It is instrumented properly, can realise freamers with square forms, rectangular, oval, rings, etc., weldings of tope and irregular pieces.
The advance and shrinking realises by means of an electromechanical group accionado by engine controlled type brushless, rollers of drag in steel treated rectified for different diameters of wand.
The cut, accionado by hydraulics cylinder, results totally independent of the electronic axles.
The axles of bent are accionados by motors type brushless with precision centesimal that guarantees a high precision with regard to the tolerances admitted.
The PTE also can instrument with supplementary units of work like presses, cabezales of punzonado, cabezales of marked, etc.
The software of the PTE of extreme simplicity allows to realise, quickly, change of pieces, forms, angles and radios of curvado, so that the operario, after a short time of learning, can handle the dobladora, safe and effectively.
Between his technical characteristics fits to stand out that the minimum diameter and maximum of the wand is of 2 to 8 mm. The length of the wand does not have limitations. The maximum speed of the advance of the wand is of 80 m/min.
The cabezales of curvado have a minimum and maximum radius curvado with perno of 2,5 to 16 mm, and a minimum radius of curvado by generation of 15 min. The precision of the axles X, And, Z is of ±0,05 mm. It realises the time rotation and antihoraria of ±300°.
The time of programming is of 5÷10 minutes.
The time for the put in production with change of diameter of the wand is of 30 min and without change of diameter of the wand is immediate.
The installed electrical power is of 48 kW.
The dimensions of the machine with protections are of 320 x 155 x 190 cm, and the dimensions of the electrical picture are 60 x 70 x 175 cm. His weight is of 2.500 kg.
