Geka Maquinaria, S.L.U. - Ironworkers (punch)
Geka Hydracrop 80/150
Cutting cutting cutting shears punch presseses: of 2 cylinders. Works of cizallado, punzonado, notched and cutting of wheel rims and profiles
The cutting cutting shears punch presseses Hydracrop 80/150 of Geka have five places of work instrumented, controlled by two hydraulics cylinders and with possibility of accionamiento simultaneous or independent. Geka Has conceived, basing in the portacuchillas radial, a system patented of floating upper blade that follows a rectilinear movement in all his course, cutting angular without deformation neither loss of material, surpassing like this the problem of deformation that generates the conventional radial system. The big stability of the portacuchillas monobloque, controlled in his two extremes, allows the setting of a long upper blade, of geometry studied for an optimum quality of cutting. The radial system, allows by means of his effect multiplicador of strength, give big capacities of cut of optimum quality. The machines Hydracrop go instrumented in his standard version with blades for round and square. Besides, this place has been designed taking into account the cut of special profiles as Or, I, Z, for what has of a wide stock of blades.
Between the main characteristics of the model 80/150 fits to stand out the cut of llanta that can be of 400 x 15 or 300 x 20; the cut of angle with standard blade (without deformation) that it is of 130 x 130 x13; the cut of angle with optional blade (small deformation) that it is of 150 x 150 x 13) and the cut of diameter or square depending of the case that is of 45 mm.
Between the main characteristics of the model 80/150 fits to stand out the cut of llanta that can be of 400 x 15 or 300 x 20; the cut of angle with standard blade (without deformation) that it is of 130 x 130 x13; the cut of angle with optional blade (small deformation) that it is of 150 x 150 x 13) and the cut of diameter or square depending of the case that is of 45 mm.
