Maquinaria Curvaser, S.L.U. - Pipe and profile benders
SMI Primatist 3
Curvadora To numerical control: with system of orbital cutting
The curvadora Primatist 3 of SMI has a capacity of cut of diameter 2 mm to diameter 22x1 mm in Cu-To the from coil, and of diameter 2 mm to diameter 12x1 in Inox-Faith.
The capacity of curvado is of half radius, minimum 1,6 times the diameter of the tube to curvar. And of half radius maximum 66 mm the diameter of the tube to curvar.
His operation is entirely electrical managed by PC and without internal soul.
The cut is orbital with tug. The conformed presents the possibility to integrate until 12 types of accessories to deform the extremities of the tubes.
The punzonado realises by tip elicoidal with 2 diameters of punzonado and holes orientables to 360° in any position.
The composition of the job centre Primatist 3 has realised beside the operario, adding module after module. Of this form is working to achieve the maximum specialisation and certainty with the lower possible cost, using an only unit of work.
The system of orbital cutting with tug, in addition to guaranteeing the absolute absence of rebabas or start of shaving in the interior of the tube, allows to cut different materials of diverse thicknesses keeping the internal section of the clean tube.