Intermaher, S.A. - Lathing centres
Mazak Integrex e-1060V/8 II Ram
Centre of turning-milling: for turnings and milling in inner diameters
The model Integrex and-1060V/8 II Ram of Mazak, mark represented by Intermaher, is a centre of turning-milling based in the Integrex and-1060V/8 II to the that has incorporated him a column beside the cabezal current and that is especially conceived for the mechanised of pieces that require turnings and milling in inner diameters, what allows to reduce notably the length of the tools employed. The minimum diameter of turning of this Ram is of 300 mm.
With some dimensions of 150 x 150 mm and a route of 900 mm this Ram has a speed of positioning of 30 m/min. In addition to placing tools of turning also offers the possibility to use motorised tools with cone Attract6, with some maximum revolutions of 3.000 rpm and a power of 7,3 HP.
Each cabezal has his own warehouse of independent tools, in the case of the Ram has of a rotary presses warehouse of 40 positions.
The model Integrex and-1060V/8 admits palettes of 800 x 800 mm or 1.000 mm of diameter and pieces of 1.250 mm of diameter x 1.250 mm of height, with a maximum weight of 2.700 kg. The routes of the axles are of 1.875 mm for the X, 1.060 mm the And, the axis Z 1.595 mm, 150° (-30°/+120°) the axis B, 360° the axis C and 900 mm the axis W. The positioning in fast of the axles X, And and Z is of 42 m/min and the one of the axis W of 30 m/min.
The power of the cabezal main of milling is of 10.000 rpm (50 HP) and the one of the table of turning of 500 rpm (50 HP).
With some dimensions of 150 x 150 mm and a route of 900 mm this Ram has a speed of positioning of 30 m/min. In addition to placing tools of turning also offers the possibility to use motorised tools with cone Attract6, with some maximum revolutions of 3.000 rpm and a power of 7,3 HP.
Each cabezal has his own warehouse of independent tools, in the case of the Ram has of a rotary presses warehouse of 40 positions.
The model Integrex and-1060V/8 admits palettes of 800 x 800 mm or 1.000 mm of diameter and pieces of 1.250 mm of diameter x 1.250 mm of height, with a maximum weight of 2.700 kg. The routes of the axles are of 1.875 mm for the X, 1.060 mm the And, the axis Z 1.595 mm, 150° (-30°/+120°) the axis B, 360° the axis C and 900 mm the axis W. The positioning in fast of the axles X, And and Z is of 42 m/min and the one of the axis W of 30 m/min.
The power of the cabezal main of milling is of 10.000 rpm (50 HP) and the one of the table of turning of 500 rpm (50 HP).
