This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Arburg sigue su tradición y presenta nuevas máquinasARBURG continues its tradition and presents new machines
ARBURG exhibits new models of Allrounder and a representative sample of its machines in the K. In total will be ten Allrounder them you will see in a space of 1,107 square meters and other 425 on the second floor. The focus will not focus only on machines but also on innovative production processes.
Arburg Allrounder 320 A, which occurs for the first time in the K, increases his Allrdrive series of electric machines.
The new A and U of the Allrounder models are presented for the first time. In addition to the well-known 170 or 150 - 30 that will produce an electronic component in a very fast cycle, also presents the new 270 U, with force closure of 35 tons and injection 100 according to Euromap unit. It incorporates a bascule lock unit and its injection unit is interchangeable, thus maintaining the universal concept of the Allrounder.
Another new size of a machine-operated electrically, the Allrounder 320 A 500-170, is launched, this time with a technical piece. The Allrounder 520 A 1600-800 will produce a piece for the packaging sector. Tags are inserted in a cast of four cavities for Cork where the labelling within the mold takes place.
The Allrounder 570 C 2000-350/350 presents a particularly interesting Setup for the production of a piece of two components: LSR and thermoplastic.
The fair's largest Allrounder will be a 820 S 4000-3200/150, in two-component version.
On the other hand, a 630 S 2500 - 1300/150, also in multicomponent configuration, will work with a cast of three seasons with the third season of anti-corrosion. The mold is rotated 120 ° at controlled intervals to produce a piece for sport, which is automatically extracted from the third season, open, simultaneously with the injection cycle. Later, the piece ends by welding by ultrasound.
The Allrounder 570 C 2000-350/350 presents a particularly interesting Setup for the production of a piece of two components: LSR and thermoplastic.
A Preliner 520-120 H line, along with a Multilift H extraction robot, demonstrating the production of PET preform in a horizontal configuration.
A fuel transfer 320 S 500-60/60 is equipped as a fourth machine for multi-component for the injection of two components. In a project carried out in conjunction with other companies, will demonstrate the production of a piece whose finishing and Assembly until the final piece is performed inside the mould.
You will also see the MuCell process, in which Arburg has licensed, incorporated in a 420 C 1000 - 350 Advance.
The fair's largest Allrounder will be a 820 S 4000-3200/150, in two-component version.
Related Companies or Entities
