GE Fanuc exhibited innovation
Control Series GE Fanuc 30i have the hardware of CNC in greater speed in the world, allowing you to run up to 10 different CNC programs simultaneously. The integrated control of sequence, PMC (Programmable Machine Control), now has speed of execution of 25 ns/step programme of contacts, being able to run 3 programs of contacts at the same time. These features and functionality make the control of the series 30i suitable for most modern machines in the upper range, requiring complex functions of ultra high speed and axes and multiple paths. These machines include models for combined, milling of 5-axis machining, and those that use linear motors.
In order to improve the capacity of machining, new technologies have been introduced in the control. The 30i uses a new ultra high-speed processor, an internal bus speed, control the flow of the servo of greater speed and encoders of 16.000.000 rev-1, as well as interpolation in nanometers. New technologies have enabled faster cycles of interpolation, reading in advancement of 1,000 blocks for control of high-accuracy contour and processing of blocks of 0.4 ms. times 8 times As a result, available surface finishes of high-quality in mould complex, minimizing the necessary polishing after machining.
Also, have been introduced two models of open CNC, offering an optimal combination of CNC and personal computer using high-speed data transfer.
Easy programming at the foot of machine W0813CNC/SP
Manual Guide i. self-explanatory menus and graphical simulation guide the user through the development, by providing results extremely efficient even for complex processes.
Software Manual Guide i of GE Fanuc is a control cycle with an ergonomic operator CNC interface used for programming cycles based on ISO code format. The operator uses a graphical user interface with icons easy to use that they create programs piece interactively in a few steps. All the relevant information appears on a single screen. The user does not have to be constantly changing between different screens at the risk of losing to open at the same time so many screens. It appears always displayed in a window the State of the machine, with the current position, progress and measures of load. Keys (softkeys) screen icons offer an automatic menu selection so that operators, without previous experience of user of GE Fanuc, can quickly use them to create programs piece without any documentation.
The new Manual Guide i combines the features of previous versions independent of Torneado and milling. The user can configure software for a turning, milling and machining combined using a standard software interface. This is very beneficial for workers that they can be familiar only with an operation.
What's new in various engines
On the other hand, GE Fanuc Automation offers a new series of synchronous servomotors for customers who want to design your own machine tools.
AC servomotors integrated synchronous GE Fanuc's series D is produce a few pairs of turn maximum from 85 Nm to 3000 Nm, according to the model. There are available versions of 200 V or 400 v. The use of powerful rare earth magnets embedded in the rotor has as a result a few pairs of turn higher. This allows angular accelerations of the engines of more than 100,000 º/s2 and top speeds between 75 rpm and 400 rpm.
Also, this company has expanded its line of linear motors to offer a wide range of maximum powers and a wider choice of physical dimensions. Properties such as rapid acceleration, high speed, minimum wear and high levels of precision are linear engines as ideal for a wide range of machine tools and other specialized machinery of high productivity.
Industrial PC and laser packages
Finally, GE Fanuc has expanded its range of sources CO laser2, designed for machine tool cutting or welding laser of high performance, with the introduction of two new models of high power. The two new sources are supplied as packages integrated with CNCs and servo motor of Fanuc GE's high reliability to optimize the operation of the machine. The latest laser sources of dioxide of carbon E-C5000 and C6000 - E GE Fanuc have a power of 5 kW and 6 kW respectively.