In the 2004 BIEMH Kenci
The modular high-performance KenTIP of Kennametal drill adds value by reducing machining time as well as downtime.
KenTIP completely new mooring system allows you to change the cutting tool while you are on machine yet. As a result, the time of installation and adjustment in lathes and special machines can be reduced to a minimum. The special combination of the toe cap of broca and the porta enable advances that were previously only possible with the bits of integral hard metal. Chips are formed in the cap of the drill bit in order to avoid the erosion in the body of the tool.
Two large cooling channels are directed precisely to the cutting edges. As a result, forms a film of coolant in the faces and the shavings, which reduces friction and temperature of cutting.
Spacious Chambers ensure an optimal evacuation of shavings and the Echelon form of the rear part of the drill bit prevents chips is suelden or is jam.
The new grinding profile HP (HP = highly positive) of the toe cap of the drill with auto-amarre works interchangeably with reduced cutting forces and has an excellent ability to auto-centrado.
KenTIP drill bits can also be installed in the tools of achaflanar Sefas, reducing the need for additional operations.
Quick-change system of Kenametal "KM Micro" tools for the manufacture of small components
KM micro provides a good platform for highly flexible of complete components through operations production of turning, copied, threading, slotted and bucking in very small spaces. The system makes it possible to reduce machine times up to 80% compared to the use of mooring of conventional type tool. In the KM Micro system, the head of full Court is changed and not only the interchangeable insert, with the body core remaining in the machine housing. The combination of the counterface end and threaded between the head of court and mooring Unit ensures the precise and reproducible cutting edge positioning. The court evidence necessary to verify the position of the cutting edge are reduced and even eliminated. The mechanism of single mooring, but effective guarantees high forces of court, even with low torque of mooring, and the heads of court can be changed very easily.
The new KM Micro system is available in sizes KM12 and KM16.
Change of plates with Kenclamp, faster, easier and with high process reliability
Kenclamp is a tool of type mooring with an easy and comfortable handling and a robust design and high reliability. This new system tool is designed for the interchangeable plates Kenloc ISO in basic forms C, D, S, T, and W. A stable anchorage pulls the interchangeable insert first towards the flanks of the seat, and then the breakaway from the top against the support. This guarantees excellent accuracy of positioning to change the Insert.
Locked Kenclamp system, the interchangeable plates is changing very fast, simple and secure way. A single mooring with thread double loose screw and secures the Insert with 1.5 twists. With the new design Torx Plus at the head of the screw, mooring forces are transmitted securely. In addition, this special construction increases the life of the screw and the screwdriver tool. The decisive advantage of this system is the fact that you only need a key to mooring for mooring screw and the screw of the support of hard metal. The number of mounting parts needed is reduced to a minimum.
System of milling planning KSOM Octo Mill for higher performance in the machining of steel, cast iron and stainless steels
KSOM strawberries are available in a range from 63 to 160 mm diameter with mooring by half step and mooring screw key in paso fino. Optimized cutting design makes them suitable for milling operations of plotting, milling and drilling on inclined surfaces of accommodation. Strawberries of roughing with simple mooring by screw system and the strawberries of finishing with mooring for key allow very high progress (fz > 0.5 mm). The interchangeable plates OF.T07L6AF.., with eight numbered cutting edges and a thickness of 6 mm, allow reaching a depth of cut of 5 mm. Designed for high advances, the interchangeable plates show excellent stability of court. Thanks to the design of the blade and the interchangeable insert design, low power consumption solves problems in production machining centers and CNC machines. These strawberries are an excellent surface finish - even without finishing tool it is possible to obtain a surface finish of RZ µm.