Intermolde increases the number of visitors by 14 %
As already announced in its day, the fair has taken on a biennial basis, so that will not be until 2006 when Intermolde again open its doors at the premises of the trade fair institution Alicantina.
Great host had the novelty of this Hall, the first Hall of the Integral subcontracting, which tabled a comprehensive offer in the sector of subcontracting, making room for companies belonging to the production process, from design to final production and for different markets.
Intermolde´04 was a hundred of exhibitors and around the 4,000 square metres of exhibition, which led to an increase of more than 30 percent in both of these parameters from the figures achieved in the previous edition. Growth, which still has more value if you consider that the Edition in 2003 was also an increase of 30 percent on the 2002.
It meets the metal-mechanic sector - plastic
In the field of internationalization of the contest, and with the objective of enhancing business contacts and increase the volume of business with regard to the previous edition, the organization worked together with various institutions and agencies of foreign promotion as the Valencian Institute of exportChambers of Commerce and foreign chambers of Commerce in Spain to enable exhibitors to establish new contacts with businessmen of France, Germany, Poland and Algeria by the visit of the latter to the pageant in advantageous conditions conducive to the full satisfaction of exhibitors and visitors.
By long experience, to be pioneers in the industry and have become the benchmark in Spain, this new call of Intermolde is a stage in the process of renewal and change started, which consolidates the event in the calendar to the changing picture of the trade fair activity in the sector.
Inauguration of the event
The event also counted with the presence of Miguel Ignacio Peralta Viñes, Minister of industry, trade and tourism; Modesto Crespo Martínez, President of the Board of IFA; Joaquín Andrés Berenguer Ramirez, Executive Vice President of IFA; Alicia Ivorra Muñoz, Director General of IFA.
What's new
Reconstruction for machinery
Luxber
In addition, it showed their injectors thermoplastics Tecnomak, with capacities of between 100 and 300 t.
APM
Boge compressors
With frequency regulator screw compressors: from 7.5 to 315 kw. Regulation of the flow from 25 up to 100%. Boge frequency controller adjusts the compressor flow to the demand for air while maintaining constant working pressure (1 bar of unnecessary compression represents 6-10% more energy costs). The adaptation of the flow of the compressor to the timely need to air at every moment is the service more efficient and economic way. Ideal for installations with a demand of air very fluctuating, when the air tank is small, and there are tips on demand. Compressors with frequency regulation are profitable both for new installations and existing installations.
Piston compressors high pressure: up to 40 bar pressure, specially designed for use in applications of PET, moulding and presses.
Efficient screw compressors: 15 to 45 kW. Up 13 bars of pressure. On the experience of its prestigious screw compressors, premiered at the international fair in Hanover, Boge has launched its new series of screw compressors with flow rates above 10% and lower energy consumption. As in other models, with multiple configurations: on heat exchanger, with built-in-insonorizado dryer.
With ARS microprocessor control system: with digital display. Clear messages of possible breakdowns and maintenance. Easy to use. Significant energy savings thanks to the automatic mode of operation of the most efficient compressor selection.
Refrigeration dryers: direct expansion. Full range of 200 l/min up to 80 m3/min. With dew point pressure of 3 ° C and sparing system of energy. Solid and reliable.
Boge Kompressoren, German manufacturer with 97 years of existence, designs, develops, installs and maintains systems of compressed air for customers in all sectors of the industry. Its full range of products includes: screw compressors, piston, exempt from oil, high pressure, turbochargers and equipment of treatment (driers, filters, tanks).
Judo
The system semi- Modu, formed by the system Modu, filters, camera, basic plate, plate of accommodation, plate of support and system of cableado, appropriate for moulds of big dimensions like bumpers, panels of instruments, containers, etc.
The system ez-Modu, a simplification of the system Modu, is ormado by the camera, filters, mini-plate of support and the system of conexionado. On the other hand, in Intermolde Yudo also gave to know the System echo-Modu, that assembles only the essential parts of the system of hot channel, formed by the filters, cameras, systems of conexionado; it is very simple to assemble to the mould. It is effective and economic for moulds of big size, as they can be bumpers, signpost of instruments...
Coproin
In the realization of prototypes through microfusión, Coproin part of the 3D model of the final piece, and going through their reproduction in wax, Stereolithography (QuickCast) or selective laser sintering (CastForm), comes to the realization by casting the final component, with short delivery times and parts with mechanical properties equal to a metallic component of Foundry.
In addition, this company introduces a fast and innovative solution in the manufacture of moulds, because that is the provider of Intl FD (Fast Delivery Tooling), LG Electronics, Inc. technology on the basis of information in 3D, Intl FD technology allows the manufacturing of moulds of precision for the injection of thermoplastics with very reduced intervals; 7 - 10 days for a mold capable of producing thousands of pieces in final material, as well as deadlines for 21-28 days for sets of up to 30 moulds.
Actronic
Actronic booth showed the range of 100 to 2200 tonnes studied machine to adapt to the multi injection technology. It is also a command system specific Dixit that integrates all the functions of machine.
The GM family, 430 to 1000 tonnes to produce at least cost with a high level of precision to facilitate the changes in production or Cadence.
Intermolde was launching pad for Vulcan from 1300 to 2500 tonnes, the technology of two dishes, a proposal with technology of two dishes. This concept responds to the requirements of effectiveness, reliability, flexibility and profitability of transformation.
The Hercules range from 820 to 320 tons is equipped with the new Dixit I automatism which reaches very high technical levels. Hydraulic closure meets all the needs of transformers who want more and more productivity.
Protecnos
SF group
cooling in parallel; cooling spiral for a more uniform cooling in cores of larger diameter with standard slices from 8 mm to 25 mm in width and length up to 600 mm and the model with quick locking system.