Equiplast 1999 - peripherals
PERIPHERALS
Alimatic
In booth C 308, 1 Palace of Montjuic 2, Alimatic exposes a totalizer equipment, control and record of the amount of material that consumes the transformation machine. It is applicable to extruders molders and injectors.
-Also exposed a dehumidifier of technical materials, with registration of parameters of production graphic touchscreen and possibility of connection to PC or printer for obtaining and processing of records.
-Sample, also a complete range of gravity dispensers, with capacity from 30 to 2000 kg/h and 2-8 components. Incorporates a special dosed dyes or additives in powder performance, as well as a software of control and monitoring of the consumption of each of the materials for each machine or integrated extruders.
-Other products that you can see here are single-phase, three-phase and multiestacionales carriers from 5 to 40 litres.
-A new theft 2000 robot created by Virginio Nastri, practical plastic boxes, filling bags etc., as well as a tab of palette and tab tape single roll; unamezclador of vertical spindle and variable pitch and a hinged conveyor.
-Process Microgel refrigerator; thermoregulating Thermogel and heat miuxed exchanger ade closed circuit
-Finally, you can see a range of volumetric fillers for screw, with capacities from 0.07 kg/h to 1,040 kg/h.
Caufar
In Montjuïc 2, booth B 279, presents numerous equipment such as mixers of the MZ series, easy cleaning and blade removable and inside of the tank without edges. The tank is stainless steel and allows a homogeneous mixing in 2-3 minutes, with possibilities of processing all kinds of materials such as masterbatch, coloring liquid, powder and recovered material. It will also expose their dispensers in the series Totcolor, with a precision of dosing guaranteed by frequency with the torque vector control inverter.
Commercial Layret
Located in Montjuic 2, Stand C318 Palace 1 represents the fair notably companies in the plastics sector: SML Lenzing, Barmag AG, Barmag Spinnzwirn, Greiner, Maac, Hema, Maka and Van Dam.
Control and supplies (see Porpoise Viscosimeters)
Commercial Coscollola(see Suhling and Reform)
Engin Plast Due
Through their representative Centrotécnica, presented to the market silos mixers line MVPA, manufactured by installment in Italy. They will be available in capacities ranging from 300 gallons to the 14,000; and they can be equipped with numerous accessories to fit any need.
It will also present a new mill, the SLBA TF, aimed at the market of the extrusion of iron sheet and thermoforming, through its Division C.T. peripherals. It is a new mill which is a major breakthrough in the recovery of the remains produced during the phase of molding by vacuum. Unlike other brands that employ conventional Mills adapted, this mill has been designed, created and produced specifically for this application.
Another novelty of this company is the SLBM 200mill, intended for the market of the injection. It is a team placed at the foot of machine and retrieve directly online the lava flows and occasional injected defective parts. The main features of this mill is the robustness of the set that offers completely location and the high quality of their finishes. Coupled with an attractive and practical design, allowing easy feeding and extraction of the material, rapid cleaning as well as a great simplicity for the maintenance of the same.
In addition to the range of mills, may also be single phase and three phase feeders of material, made in stainless steel with automatic self cleaning system; drying by hot air for different capacities; dehumidifiers, gravity and volumetric fillers; and new equipment for centralized supply of materials by vacuum.
Eurotecno
It is present in the Palace of Montjuïc 2 1 stand C 369. Its production is basically oriented to systems of recovered and recycled; trituradores 1.5 to 300 CV Mills; mono extruders or bi-husillo as machine itself; development of complete lines for the manufacture of colored, masters and compounds, tubes, profiles, coating of electric cable, packaging strapping, termoconformar, raffia and string flat sheet.
It also manufactures elements to complete a production line by adding the necessary auxiliary components.
Gala
A new system of granulation of spheres and beads for masterbatches, who comes to increase the benefit Gala systems presented through Centrotécnica. The particularity of the team consists of the new design of the rows and cutting technology to achieve greater accuracy and quality of the finished product. At the same time will be the new RTU, which you cosiste in a laboratory, its granulation systems scale replica.
Green Box
This Italian manufacturer of termoreguladores water pressurized with an accuracy of 0, this 5Cestá working temperature through Caufar (Montjuic 2, booth B 279). It also manufactures refrigerators of different characteristics. It specialises in thermodynamic control units and refrigerators of processes.
Maintenance automated SA
It sets out the following teams:
-facilities centralized for large flows and distances: power of the machines can work each one of them with any of the products, either with one at the same time.
-plastic products-breakers: grinding of plastics (cast) silenced.
-flexible elevators for any plastic product.
-dispenser products type DCL : storage, automatic dosing (accuracy 1% ). Homogeneous mixture and elevation into the hopper of the machine.
Mecanofil
At the same booth that Mateu & Solé, both from the same group, presents the mill 15/21 M3 S15, with several changes to its technical characteristics. Its main feature is transmission through trapezoidal belts, with a consequent reduction of revolutions (230 rpm) and noise, much less than the maximum allowed by European standards. The mill produces little dust and its energy consumption is minimal. The engine is 2.2 kW and the host, which is independent, is 0.37 kW.
The cucillas are of special zcero of long duration, with the sides and of the rotor are fixed type cassette and recoverable.
It will also expose another series of mills of its range.
Moditec
It will use the event to present through Centrotécnica (Montjuic 2, booth C 340) new.su crushers Goliath Twin with 3-axis line, which represent a remarkable innovation in the recovery and decrease in volume of defective injected parts of large volume. On the basis of the basic characteristic of the Goliath crushers (silent, do not create dust, not degrade the material and turn low speed and high torque, very low energy consumption) to the new series has incorporated a third axis above high and centered on the two main; and that is forcing the piece to grind the blades that are cutting and calibrated teeth who later crushed the chunks in a uniform, dust-free granules and which has not undergone changes in its structure.
Nova Frigo
New water coolers equipped with ecological gas be put as a world novelty in the stand of their representative Centrotécnica. Advancing to the European regulations in the field of environment, which provide for delete in a few years the use of gas freon-22 (commonly used by all manufacturers of refrigeration equipment), Nova Frigo already has the R-K5000 series teams; with characteristics of high-performance and energy saving of Jolly-R series, it used to operate ecological gas.
At the same time it presents two new lines of atemperadores of completely autonomous mold.
Piovan
At the stand of luiso S.L (Montjuïc II - C 325), will present their auxiliary machinery and systems for the automation of the Piovanmark plastics processing industry: feeders, dispensers (volumetric and gravity), controllers of temperature, chillers, deshumidificación-secado and granulators.
Manipulators and robots Piovan+Star Automation will also be installed on machine in Exposition.
Plastics Machinery
Can this company, also Italian, at Caufar (Montjuic 2, booth B 279) stand, be known your FSB and FTB series food hoppers, various dehumidifiers that contains its offer, the granulators for troughs and systems for material handling.
Porpoise Viscometers
In the Pavilion its representative Equiplast 1 E 49 Stand Control and supplies presents products able to quantify the quality of the raw material at the same time that comes out of the reactor. This means that the optimum parameters of the process can be established and kept for the production.
It is possible through the system of sampling of powder or pellets, it feeds the rheometer that measuring the parameters of the product, displays the results in a display of instant and trend graphs and generates signals for your feedback to the plant control system and provides a control loop closed without operator intervention.
It also manufactures an automatic revolver, feeding through laboratory rheometer with self-cleaning between measurements.
Sepro
Displayed in Montjuïc 2, booth C 348, different developments of its extensive range of robots to machines of injection of plastic. It should be noted the new PIP 3010 BZ equipped with three numeric axes servomotorizados and designed for machines of small tonnage of 25 to 80 t. It will also present the new telescopic arms of height reduced its models PIP 3020 BZ and BZ 3030 PIP, which includes the fact to be able to be installed in factories or workshops in low altitude or with a bridge crane also reduced as advantage over other similar robots.
This stand will be complemented with a PIP 3051 BZ large robot designed to equip machines of between 500 and 1,300 T, it will be one of the great attractions of the fair, given the spectacular nature of its simultaneous movements at high speed and acceleration. It will also be a PIP 3010 XN robot and PIP 55 heat pump.
Sepro closed 98 covering 85% of the French market and more than 30% of the European. In that year, no fewer than 1,400 injectors were automated with their robots and manipulators. Other recent news already published in this magazine is the new plant, operational since June, which will allow the construction of 2,000 annual robots in 2000.
Suhling
Represented by coscollola cial., this German company manufacturing robots for extraction of parts and work. Supplies linear robotic systems, structured in a modular way for machining parts from 10 g to 800 kg.
TecnoMatic Robots
Its Cartesian robots CNC for 80 to 2,000 tons injectors are represented by Caufar (Montjuïc 2, booth B 279). It has a structure of light alloy and steel bearing balls with binoculars runners and high speeds in the movements on the Cartesian axes. The vertical axis, except in a model Mini, is telescopic.
Wittmann
Wittmann (Palace 1, Montjuic 2, booth C 358) presents a new series of robots with optional components of carbon fiber for several of its modules. Significantly reducing the moving mass of the robot achieved speeds and greater acceleration, thereby improving cycle times. Especially faster is the axis that enters the mold to remove the piece. It is a series improved with packages of drives, as well as the reduction in weight of some of the main components.
In addition, a modular design allows variations to suit specific needs of customers. No less important is the new control to the series, equip with a graphical interface whose benefits, for example, can learn in the virtual reality of the stand of Wittmann show. In a dark room, with a special pair of glasses, visitors can learn the advantages of virtual reality for the programming and the new control.
Another important news: along with its known range of regulators flow and atemperadores, are teams of cramer trocknerbau, company acquired by Wittmann more than one year ago.
