Equiplast 1999 - extrusion
EXTRUSION
Bausano
In Hall 4, booth A20, this company will explain the advantages of PVC Foam. On the basis of the lines of extrusion of profiles with double extruders spindle series MD, used especially for profiles for sockets and internal decorations, had been incorporated now lines of extrusion of rigid plate, width up to 1,600 mm, with a range of 3 to 30 mm thickness After the completion of 5 lines that include MD 125-21 Bausano extruder has updated the field of possibilities of use of these facilities, expanding the range of products that can be extruded.
In addition to the extruders, this company can deliver to its clients complete installations turnkey: installations of storage and dosage of raw materials, mix with turbomixer Valtorta of high efficiency and with imitation wood molding facilities.
TSA
Represented by centrotécnica, S.A. (Montjuïc 2, booth C 340), presents two lab extrusion lines based on the double extruders 21 to 26 mm. corrotantes spindle for the coloring, sampling and small production of masterbatches, compound, thermostable paints, concentrated pharmacists, etc.
The range of the lines of 21 mm. EM, EC, EP and EF is based on a double corrotante screw extruder "table" with a brushless motor from 3 kW to 600 rpm (1,5 to 300 rpm for the extruder pharmaceutical) with capacities of up to 10 Kg/h. TSA also builds and provides all assistants needed for a complete line like: dosing screw or vibration, liquid injection systems, systems for vacuum, lateral feeder design and double spindle, cutters, system of control by microprocessor, etc.
TSA21 lines are used for the coloring of masterbatches, the realization of coloured samples or compounds, the coloring of powder paints and the realization of concentrated pharmaceutical samples.
It will also present the new line of extruders double spindle EMP/ECP26 of 26 mm. to high torque/high turns with systems accionamiento-motor of 9 kW and a speed of 600 rpm or 15 kW to 1000 rpm axes. ideal both for research and development and the realization of samples. With this new extruder production high (up to 50 Kg/h) can be obtained.
Union
It is one of the Centrotécnica (Montjuic 2, booth C 340) represented. It has a team of co-extrusion of iron to 3 layers with the dosing pump for each layer. This ensures a perfect stratification with very close of the finished product tolerance. It incorporates a specific roller press for this team, equipped with cylinders with independent drive with super chrome finished, and intended for a sheet of very high quality, designed to fields such as refrigerators, bathtubs, showers, etc.
Weber
Represented by helmut roegele exhibits at the stand of the company an extruder of double spindle for manufacturing profiles and pipe CE 5 with control system WSS (Weber Scada System), developed by the company and which controls all the parameters of extrusion necessary, even in an operation of multiple extrusion with synchronization of up to four extruders with feeder materials. As an alternative, offers a control system developed by a manufacturer of control systems: the P-Open.
The new design of the dual parallel spindle Weber extruders is characterized by its construction using 3-axis in the case of transmission of power from the engine to the spindles, which allows them to reduce by one third the length of the machine, the process of PVC
