HASCO is involved in a project of development of a hot channel nozzle

The mold manufacturing was designed and manufactured by Hasco. To do this, the development of the Department of engineering team placed emphasis on the construction of the nozzle and, especially, in an optimum and improved cooling of the inserts.

The new Multi Shot Z10440 has 2, 4 or 6 interchangeable nozzle caps individually. A patented special design of the leading edge of nozzle and its fixing guarantees greater ease of service. The CAP and the deck are together in a segment, so that they can be mounted and removed easily from the level of separation, even without the need to temper it. In the event of damage to the mould, individual cavities with a 'blind segment' can equip and so it can continue production in the cavities of the mold remaining technical difficulties and without work classification by pieces with rejection.

The optimal cooling of the inserts, as well as the Elimination of secondary Distributor, led to a reduction of the cycle time of about 35%. Injection site complies with the required optical and dimensional requirements. Colour change could be quickly and cleanly through the channels of passage of material have been designed according to rheological criteria and careful with the mass itself.

For to realize the project of mold of economical and efficient way, made use of the extensive range of standard more of the market: that of Hasco. Since that should be designed as a production mold, mold temperate and wear-resistant plates manufactured 1.2764 were used. The rest of the structure of the mould was conducted with the accredited Toolox33. For an economic anti-corrosion, incorporated elements of the range of slides of Hasco. With the new regulator of multichannel hot Z1240 / was achieved quickly and accurately, rules as well as a user-friendly programming.