Sacmi in Plast 2009
First and foremost is last generation press CCM24S, in the field of the compression technology; departure from the laboratories of the Division Closures & Containers of Sacmi Imola. The 'continuous compression molding' technology makes this machine an additional step forward. Developed by Sacmi Imola on the wake of the CCM48S, the machine features similar performance, with time/cycle reduced (up 2.4 seconds) and modest consumption. With its 24 hallmarks is proposed as the ideal instrument for those factories that they go on a hourly productivity of 30,000 pieces. It can produce up to 33 mm in diameter capsules (regardless in PP or PE) the CCM24S enhances the range of offer of Sacmi, combining high productivity and content consumption with maintenance costs particularly low and flexibility of administration. The CCM24S press, as well as the CCM48S, is produced by Sacmi with integrated vision system CVS for quality control in line of the capsule. In Plast 2009 the press will be integrated with the machine for folding and cutting of the seal of assurance, the FSM12L series. Machine combination capable of two operations (fold and cut) at the same time, avoiding loss of time in the transport of the capsules, in addition to significantly reduce energy consumption and the possibility of establishing damage and dust to the same capsules.
Plast 2009 will also be an important showcase for Oima, the factory of the Sacmi group specializing in the production of injection presses specific for the packaging sector. Will be to integrate the supply of the Sacmi group in the world in plastic capsules and containers in thin wall, two presses KP220 the new Stratos KP series, configured in a way specific to the food packaging industry. Among the main technical characteristics of machines of the Stratos KP series, there is the hydraulic installation, equipped with hydraulic accumulators which administers all the movements of the machine; In addition to a system of control of speed and pressure in closed ring processing servo-válvulas. The injection of new vision group, provides for two piston injection in axis (Oima 'Twin'), while the myriad of plasticizing is powered by an electric motor 'high torque' Siemens, mounted directly on the axis. Plot them mounted resistors isolated pottery for the heating of the plasticizer and prismatic guides lubricant car for the support and the departure of the Group of injection. The control is entrusted to the new unit ECO NT III, with pages of auto composition of cycles of the press.
Also the second press Oima for Plast 2009 proves as also in the packaging sector, it is possible to produce large volumes while minimizing the time/cycle and optimizing energy consumption. The application proposal in this case consists in the production of two covers in polypropylene (the weight of 22 grams) for varnish of 2.25 liter cans, in a cycle time of 5 seconds also comprising the sequences of the automation that makes the inclusion of the tag in the mold, the removal of the pieces and their deposit ordered on conveyor.
One last important novelty is the machine inspection CHS, product of the Division Automation & Inspection System of Sacmi Imola. Inserted, on this occasion, Valley of the Oima line, which guarantees the maximum productive efficiency and, at the same time, high standards of product quality. Able to inspect, in fully automatic mode, up 3,500 pieces per minute (12 to 50 mm capsules) and the CHS is equipped with a support multi-camera designed to control at the same time inside and outside the cover, detecting each type of defect Lodge.
