This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Process Control (Açinco) en Plast 2009Pavilion H13, stand B75
Process Control (Açinco) in Plast 2009
February 16, 2009
The machine of feedback RMX part of recycling 'In line' of the Business Process Control System. In times of explosive energy costs is welcome a procedure of saving of CO
2 in the process of extrusion, which seeks to save how each kWh electricity costs are an important item in the extrusionadoras companies.
Taking into account the increase of energy prices by increasing global demand and waste of film (lateral strips) conditioned by its manufacturing process, the Process Control company offers the regranulado, a procedure to recycle such waste in the form of a product in bulk (grain) of easy to use.
The mills of cut of the film work on a genuine principle of scissors cutting and therefore not heated product demonstrably
In-Line 'ASR' recycling system
A typical regranulación installation consumes approximately 1.75 kWh/kg of plastic recycled during the complete recycling process (grinding, melted, pelletising, cooling and transport).
Mills cut of the film work on a genuine principle of scissors cutting and therefore not heated product demonstrably. The chemical degradation of the material is excluded and therefore save large amounts of energy.
Recycling In-Line 'ASR' of Process Control system is very easy to use during its operation and implementation under way. Usually consists of a vacuum (Venturi) transport system of lateral strips, film and a feedback RMX machine cutting mill.
The machine of feedback RMX part of recycling 'In line' of the Business Process Control System.
