This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Boy, en Plast 2009
Hall 24, stand B05
Boy in Plast 2009
Drafting PU16/02/2009
February 16, 2009
Hand in hand with C.T. service (Centrotécnica), the Boy brand presents the Italian fair of plastics from Milan, from 24 to 28 March, three developments. It's the Boy 55 E, Boy 35 M and 12 A Boy models.
Plast 2009, Boy shows an application of 'laptop white room' 55 E model. Safety for insulin syringes plugs are produced under conditions of white room with 16 cavity moulds. Individual parts of the cleanroom are mounted in a space reduced above and below the unit locking cantilever characteristic boy. The unit of flow laminar is integrated into the main gate of security, as well as the sealed evacuation of the parties under the mold; It guarantees a production of medical pieces with minimum space requirements. With an area of only 3.6 square metres required for the injection machine, is not needed additional space or a room specially built or equipped.
Procan Alpha control stands out due to the extreme ease of operation through the patented touch display in MultiLanguage
New control Procan Alpha
The Boy 12 to produce micro gear toothed with a weight of only 0.001 grams. Plastic parts are collected from the mold of two cavities, through a comprehensive collector performance servo motor, and deposited according to each cavity in a separate container. The integral collector is installed inside the door of security of 12 Boy in a small space. Highlights of this implementation is the unit of plasticizing of 12 mm and the new control Procan Alpha. This small plasticizing unit is optimized especially for micro-injection, thus guarantees permanence of material quicker too. In addition, the risk of thermal degradation of the material and the deterioration of the properties of the same are reduced clearly.
In terms of precision and consistency, Procan Alpha control stands out due to the extreme ease of operation through the patented touch display in Multilanguage.
The Boy 35 M machine, especially equipped for the process of rubber, will produce boards. A unit of automatic brushing desmoldeará molded components. The function of control of the unit of brush appears within safe Procan MD control.
Boy in Plast 2009 shows an application of 'laptop white room' in the model 55 E.
Related Companies or Entities
Centrotécnica - C.T. Servicio, S.A.