"The basis for success is a flexible production line"

Volker Jährling, is chief operating officer of the firm Windsor Kunststofftechnologie, responsible for the development and production of the injectors multicomponent Sandretto series Nove Multi installations of Windsor in Hanau (Germany). Both companies are part of the Cannon Group.

Over the past years, Windsor has specialized in the niche market of multicomponent injection. The Nove Multi series of Sandretto represents a development of the machines multicomponent preparing Windsor by adding the unit PlugXPress to the standard fuel transfer Nove S.

The Nove Multi series is a development of the basic concept of PlugXPress: autonomy and flexibility of the second injection unit, but with the advantage of complete integration in the concept of the machine and the control.

To succeed in today's markets, it is extremely important to be able to react quickly and effectively at the request of the client. The basis for achieving this is a flexible production line. When all types of injection units have been built and tested, longer only needed mechanical coupling component to combine the standard machine with all the devices as needed. This is effective, efficient and has the advantage of being very understandable to the client. Injection units can be replaced also. Choose a machine Sandretto series Nove Multi offers customer the possibility to adjust production capacity to current demands every year without having to invest in a new machine.

Buying a fuel transfer of Nove Multi series, customer benefits from the great experience of Windsor in machines converting conventional injectors multi-component and of the concept of Nove S of Sandretto series.

The characteristics of this series are its great flexibility, as well as the number of possibilities of combination of units, such as being able to choose between different provisions of these. In addition, each injection unit is programmable separately.

The second unit of injection for the series multi-component Nove Multi is completely autonomous. If necessary, the modularity allows replace unit injection without problems and with very little effort.

The machine directly connected to the units of injection with can-bus. In addition, the wiring has become so it simplifies the installation.

The Nove BN series is a range of machines that is characterized by having a technology multicomponent for a maximum of two components and similar weights for injected.

In the Nove BN series both units are arranged in V-shaped and any variation of position is very limited. In the new series Nove Multi is only default position of the main injection unit, which is why the number of injection units that you want to install and its position can choose without restrictions.

The Nove Multi series injection units can be programmed separately, which in comparison with the units of another series, offers much more flexibility in the process of injection.

The Nove Multi series is offered with forces of closure from 1,300 to 4.850 kN. The international classification of the main units of injection varies from 430 to 2,650 Euromap, corresponding to diameters of 33 to 80 mm spindle For additional injection units sizes range from 107 to 430, which is equivalent to 20 to 55 mm spindle diameters

Due to the demands of customers, second injection unit can be placed horizontally, L-shaped, vertically or inclined on the first unit of injection. It is also possible to place more than one additional injection unit in parallel in each of the above positions.

The range of the Nove Multi Sandretto series has been designed and built by a close collaboration between Windsor and Sandretto. According to the modules of the machine Assembly is carried out in Turin (Italy) or Hanau (Germany).