O.C. Systems presents at Equiplast 2008 their prolonged for direct lateral injection nozzles

Nozzle for mainly used for injection lateral injection internal areas particularly criticism and when the geometry of the particular injection you need a cap with reduced space. This grout is recommended when it is necessary to move the maximum possible area illumination of the nozzle of the surface of the piece, in order to avoid alos and inestéticos, so it makes it ideal for the injection of parts type plugsparts of small dimensions as well as containers of elongated forms. On the basis of specific requirements, it is possible to customize the distance from the point of injection to the axis of the nozzle.
This type of nozzle is not appropriate for use with abrasive materials.

This nozzle with elongated profile and maximum of 45 ° inclination is indicated when the injection point is located in a particularly critical area and when the application requires a cap with very small spaces. It is possible to customize the angle of the CAP based on the position of the point of injection. This nozzle is suitable for injection both outside and inside of the piece.