A-5 presents its latest in mixers in Equiplast 2008
Continuous gravimetric mixer model XDG4 of Process Control
With the series 'X' of the mixing of Process Control solutions to those extrusionadores who need accurate dosing and an optimal homogenization of the mixture are provided.
Based on the principle of differential balance of dosage is can be dosed accurately and continuously minimum amounts of up to 80 gr/h by angled precision spindles to the dosage.
It includes a static mixer, which homogenizes particles, also the different size of grain, form of particle and gravitas.
A specially constructed collector guarantees that no particle fluence and at risk of separation mixing well reach the extruder.
The family of the series 'X' consists of models for 4, 6, 8 or 10 elements with various sizes from models of laboratory for up to big production lines (3000 kg/h approximately). Also, apart from the pellets can mix and dosage of gravimetric form powders, crushed and liquid.
Gravimetric mixer discontinuous loads of Process Control
Process Control as a new Member of the already existing family Guardian presents a gravimetric mixer with integrated material powder dispenser.
Models for lots from 0.125 kg to 12 kg have capacities of up to 2,200 kg/h and a maximum of 12 components by mixer.
During the past year Process Control introduced a Guardian with dispenser of crushed and now as a last innovation a version with the integrated material powder dispenser. This also allows the user to introduce very accurately loads in bulk in the form of powder in a homogeneous mixture in low-cost applications.
A large selection of diameters of spindles and designs in combination with different gear ratios, offers the possibility of dosed material powder complicated with different capacities of dosage. The agitator driven separately with adjustable speed ensures an effective dissolution of the bridges that may form during the process.
Hot dishes of Fontijne press
LabPro 400 press with programmer of the process and control of the program allows to close the front cover of the space of pressing to operate under conditions of vacuum, it is necessary for certain types of special tests such as for example the production of test-tubes of plastic reinforced with fibers.
The dishes are installed in a vacuum chamber to implement new processing and parameters with the option to apply controlled environmental conditions.
One of the applications of the hot dishes of laboratory presses is to test tubes of composite materials for subsequent physical trials and others. But they are also used for the production of small series.
The 400 LabPro is basically used for precision pressed on r & d and quality control in the industries of plastic, elastomers, laminated wood and aerospatial.
Line of compounding of Rondol Technology Laboratory
Extruder for laboratory model 21 mm TSC desktop with double spindle of 21 mm and L = 25 D. The speed of the spindles is infinítamente variable from 0 to 300 rpm. The sections of the cylinder are modular and interchangeable. The profile of the segments are intermixed, self-balancing corotacionales. The configuration of the segments is for general applications in 2 steps, but they are modifiable.
They are made of nitriding carbon steel and are easy to change and clean in a change of process.
Interchangeable sections measured L = 5xD and include the following sections: one for refrigerated food, two power above the cylinder, one side feeding and a discharge. A header row with drive easy to change row and volumetric dosing of simple spindle of 25 mm for main food has. Volumetric dosing of double spindle 12 mm for secondary feeding, bath of water cooling of the thread, dryer of threads with compressed air of great efficacy and granceadora of pellets of fixed length.
