Raorsa commitment to energy-saving machines

The manufacturer of the Hitachi Group presents the hand of Raorsa its fourth generation of fully electric machines. Injectors who have had success in its first year of introduction in Europe and expected the same Spanish market acceptance. With a production of more than 3,000 units annually and electrical injectors of more than 25 years experience, Toyo, is enshrined as one of the leading manufacturers of these types of machines and as one of the manufacturers to invest more in research and development of their machines. The new series if-IV of the Toyo injectors has been the result of collaboration of the Japanese manufacturer with the prestigious Kyoto University. Its novel design in the system of knee v transferred the dishes of the machine a force centered and balanced with extensive runs of opening and high speeds. Thanks to modern technology incorporated into these injection machines is achieved a total of up to 80 percent energy savings. They are also characterized by its low level of noise due to the design of the transmissions that manage a reduction in the noise level in all their movements of up 8.1 dB less than any other electric machine of the market. They have a wide range of clamping force between 30 and 850 tons. Also they can be equipped with groups of injection tailored to every need that each model of machine there is the possibility of incorporating up to three groups of injection with its respective spindle sizes, highlighting the 'type-iii' group which can reach speeds of injection of up to 1,000 mm/s.

Raorsa-Euroinj signature series Energy will be presented in Equiplast as an evolution of series D and BT that get in these injectors lower consumption in production processes. The improvements on this machine, produced by the Taiwanese manufacturer Lien Yu, are ideal for working with large cycles. Thanks to the new Siemens engine control system, it is possible to maximize the energy resources in the drive of the bomb, allowing stop the engine in the dead of the production cycle times and providing the necessary energy according to the requirements of each of the movements of the machine. This new system avoids the excessive heating of the hydraulic oil to the not be circulating at all times, also collaborating in the cooling system energy savings.

The incorporation of these new technologies to the Raorsa-Euroinj injectors can achieve savings of up to 60 percent on your electricity bill.

Initially the concept of hybrid machine applied only to the models of the BT series of Raorsa-Euroinnj brand, but the advantages of the electric drive in the movement of cargo have been extended to all models of this Taiwanese firm. Raorsa will present a machine of the Serie-D with the powered movement of cargo, simultaneously with the opening of the mold by a powerful electric engine Siemens and accumulators for the injection movement in order to allow some pressure and injection speeds higher than the standard Serie-D greatly reducing machine cycle in Equiplast as well as its use in electrical power and hydraulic oil cooling.

As a complement to the injection machines, Raorsa will present some of their signature Alpha Robot robots. Robots with an excellent speed of operation, precise handling of the pieces, a simple control and great robustness. In addition have the advantage of the service of Alpha Robot to adapt their robots to each of the production needs of its customers. In Equiplast may contemplate a manipulative saca-coladas of the Phoenix model and a Cartesian robot powered in its three axes by servo motors.