This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Soraluce, S.C. en la EMO 2007

Ver más artículos sobre: Spain ranks sixth among countries participating in the EMO

Soraluce, S.C. at the EMO 2007

26/11/2007

Soraluce in Emo 2007 presents its range of work centers. It is the case of the Centre of milling table fixed in the TA-25 Automatic, Central series of milling of mobile column on fixed table SP-10,000, the center of milling-bore to FR-12,000 mobile amount, and the center of milling of FV 6000 HSC mobile column.

Centre of milling of fixed bed

TA-25 Automatic series consists of several models of centres of milling table fixed, that incorporate automatic head 2,5 ° x 2,5 °, 24kW, and 4,000 rpm; a table with a surface area of 2,700 x 1,000 mm, rapid advances of the axes X, Y, Z, of 25,000 mm/min; automatic storage of 20 tools; numerical control Heidenhain iTNC-530, and full fairing, according to European directive. The X axis longitudinal course is 2,500 mm, vertical axis during and is 1,250 mm, while the transverse course Z is 1,200 mm.

These machines, useful for subcontractors, manufacturers of molds and dies of small and medium-sized, offer the possibility of integrating a head positioning each 0.001 ° in the vertical articulation.

Centre of milling of mobile column on fixed table

Model sp-10.000 is a Centre for milling of mobile column on fixed table that incorporates rapid developments in axes x, y, z, of 25,000 mm/min; numerical control heidenhain itnc-530; Automatic milesimal head of 30kw, 5,000 rpm, 0.001 ° x 0.001 °, with possibility of coolant through the tool. The x axis longitudinal course is 8,500 mm, vertical axis during and is 2,000 mm, while the transverse course z is of 1,500 mm. It also has stores in 60 tools, a table of 8,000 x 1,100 mm with a full fairing, according to European directive. centres of soraluce milling of the s series can be equipped with various types of Heads of 3,000 to 6,000 rpm. These machines with transverse course of 1,200 to 1,500 mm, and widths of 1,100 and 1,350 mm table a few machines are useful for those users of milling machines that need a great deal of flexibility, a high capacity of chip startup, as well as high demands in precision finishing. the centres of milling series S can be equipped also with electrohusillos of high speed, from 18,000 to 30,000 rpm.

Centre of milling-bore mobile amount

The Centre of milling-bore to mobile amount FR-12,000 presents a longitudinal course x-axis of 12,000 mm, a vertical axis course of 3,600 mm, and a transverse course Z of 1,600 mm. This model has rapid developments in axes X, Y, Z of 25,000 mm/min, numerical control Heidenhain iTNC-530, orthogonal head 37 kW and 4000 rpm, with the possibility of coolant through the tool, horizontal head 37 kW and 4,000 rpmwith the possibility of coolant through the tool, platform-independent lift, change auto heads, 80 Tools store.

Thanks to its great modularity, Soraluce milling centres to mobile amount, F series, allows large pieces and works shaped pendulous, with the possibility of finalizing projects with two opposing figures. The course of the series (f) (4,000 to 30,000 mm, vertical 1,600 to 5,300 mm longitudinal and transverse 1,200, 1,500 and 1,600 mm), and the possibility of incorporating rotary tables and tables rototraslantes, make the F series, machines for customers who need flexibility, high capacity of start of swarf and optimum accuracy in the finish. The milling machines with mobile amount of the F series can be equipped with automatic headers and/or octoganeles of 28, 30 and 37 kW, from 3,000 to 6,000 rpm, as well as automatic warehouses tools from 30 to 120 positions, and electrohusillos of high speed. The characteristics of the centres of milling mobile amount of the F series, lie to them these machines are flexible and useful for the machining of large parts in a single subject, and can perform roughing, semi-finishing and finishing operations, with a considerable cost savings for our customers.

Centre of milling of mobile column

The FV 6000 HSC is a Centre for milling of mobile column featuring rapid developments in axes X, Y, Z of 60,000 mm/min, acceleration and 4.5 m/s, numerical control Heidenhain iTNC-530, giroscópicos head 0.001 ° x 0.001 °40 kW and 8000 rpm, with the possibility of coolant through the tools; giroscópicos head 0.001 ° x 0.001 °, and 18 kW, 20,000 rpm, with the possibility of coolant through the tools, and full fairing, according to EU regulations. The longitudinal course X axis in this model is 6,000 mm, vertical axis during and is of 1,700 mm, while the transverse course Z is 1,000 mm.

Centres of Soraluce milling of the FV-HSC series can be equipped with various types of heads between 8,000 and 21,000 rpm. These machines with giroscópicos heads of 0.001 ° indexaxión, longitudinal courses 4,000 to 10,000 mm, vertical of 1,700 mm and 1,000 mm transverse course, are useful for those users of milling machines that need a great deal of flexibility, a high capacity of chip startupas well as some high demands on precision finish.

These features make Soraluce milling of the FV-HSC series centers fast machines to perform, with a single setting of the piece, the machining full of the same, roughing, both semifinishing and finishing, as well as the possibility of working in penduleo. These models are ideal for aerospace and high precision mold.