This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Platos de vacío como equipamiento para medición superficialPrecise surfaces give the best result
Dishes of vacuum equipment for surface measurement
Witte Germany, manufacturer of various represented in Spain by DTC technology, S.L., mooring systems not only manufactures a wide range of standard products but that special and custom solutions are also available.
The design and manufacture of vacuum mooring equipment, is part of the company's "day to day". Vacuum dishes have been manufactured in all possible sizes for surface measurement systems equipment. The mooring surface is made of porous aluminium, which guarantees, insurance and soft mooring of delicate pieces. The porosity allows tie on the entire surface of contact, avoiding at the same time any damage or distortion in pieces such as plates of circuits or electronic chips.
To achieve the required accuracy of 5µ surface is usually machined with a diamond tool.
The holes for fixing on the outside of the plate guaranteeing repeatability in measuring machines positioning. In the past, the pieces were usually attached with glue on the surface of mooring. This to need more time and you made difficult the positioning, the repositioning was virtually impossible.
This kind of dishes of vacuum not only allows a quick and easy parts tie but they also get better accuracy.
The white area of vacuum mooring (made of porous aluminum) has a precision of 5µ. The fixation on the outside holes allow setting the metering equipment.
The design and manufacture of vacuum mooring equipment, is part of the company's "day to day". Vacuum dishes have been manufactured in all possible sizes for surface measurement systems equipment. The mooring surface is made of porous aluminium, which guarantees, insurance and soft mooring of delicate pieces. The porosity allows tie on the entire surface of contact, avoiding at the same time any damage or distortion in pieces such as plates of circuits or electronic chips.
To achieve the required accuracy of 5µ surface is usually machined with a diamond tool.
The holes for fixing on the outside of the plate guaranteeing repeatability in measuring machines positioning. In the past, the pieces were usually attached with glue on the surface of mooring. This to need more time and you made difficult the positioning, the repositioning was virtually impossible.
This kind of dishes of vacuum not only allows a quick and easy parts tie but they also get better accuracy.
Related Companies or Entities