Haitian adjusts the fuel transfer to the size of the client
The control system which chose is of Austrian manufacturer Keplast, in particular the Keba model 4030i, which features a color touch screen and features like 100 memories of mold, double connection USB port and card CF; acoustic and luminous alarm graphic of injection and closure, quality control, intrusion and cold drop, programme and predisposition boot / power strike (programming).
The Group of injection also shows a configuration appropriate to what the client wanted. On this occasion was used to offset injection system of double cylinder, accompanied by a group of special PVC plasticizing. It also emphasises the cooling system of the camera, which is carried out through electroventiladores.
The spindle, for its part, is equipped with cooling oil, allowing to maintain the temperature to 120 ° C reducing heat stress of the PVC.
Along with some of its features, is that the hopper is made of stainless steel, the hydraulic motor is high torque at low rpm and hydraulic equipment is the Vickers/Rexroth brand (including pump drive). Linear transducers are Novotechnyk and its function is to control spindle positioning and injection cart.
Other details are: PID temperature control of the plasticizer, purge program, program of cold drop and contra-presión of dosed and speed of programmable load in 5 phases.
In regards to the closure group, it's a mechanical closure with knee of double inclination and five supports. The dishes are built according to Euromap 2 standards and have grooves in "T" and threaded screws. The Group incorporates a double system of molds, using eight ties set the mold.
Centralized automatic lubrication, drop four hammers hydraulic (two fixed dish and two mobile dish), four valves of air (two in the fixed plate and two on the mobile phone), adjustable automatic expulsion, selection of the number of multiple expulsions and mold insurance are also interesting configuration data.
- Oil type by-pass installed in the hydraulic return line filter.
- Sensors magnetic in the pump suction.
- Electrical sockets (one of 32 A and another 16 a).
- Interface robot - Euromap 67.
- Additional plate robot.
- Antivibradores.
- Thermostatic valve oil temperature control.
- Carenado special PVC mould side piston.
- Plate and certified security CE.
