This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Cinco Sintesi y un nuevo control

Ver más artículos sobre: K'2001 does not disappoint and surpassed the tense international situation

BM Biraghi

Five Sintesi and a new control

15/12/2001

BM Biraghi exposed 5 machines of injection of the Sintesi series in order to cover almost the entire range. The project of the Sintesi line is based on the concept of modularity, which allows to build special machines with interchangeable standard components among themselves and therefore with fast deliveries, at a fair price and with the best technology. Given special attention to energy consumption and ease of use, reliability and performance.

The new system of control AELIAN 3200, involves the use of optical fibers to ensure the absence of disturbances of electromagnetic nature. The operator console, integrated into the machine in ergonomic position and the use of simple floppy contribute so that also the electronic part and the software are notable elements of a machine of injection extremely developed but simple and easy to use.

Each exposed machine is dedicated to a different application to demonstrate best the versatility and the Sintesi product modularity and to diverse interrelated applications sectors.

The applications are as follows:

Sintesi 100 PET - It is fully equipped, with mould 4 cavities, for the production of preforms 5 Lt. The team has been done in collaboration with the Campetella company who has dealt with the part of extraction and transport outside the machine of preform them and with Plastic Systems for granules of raw dehumidification equipment.

Sintesi 200 medical products - is a specific application for the medical sector. The press has been manufactured with specific attachments to prevent contamination of the molded parts (in this case the body of 5 cc syringe.). The mold is 48 cavities. "Moulding cycle was approximately 10"

Sintesi 175 twin - all the presses of the Sintesi line twin for bicolor / sprayer, are based on a standard machine that uses a second group of plasticizing (always in series). This group, if the user needs, can be isolated and the machine may be used in version mono-componente. The two materials are polypropylene and thermoplastic rubber and molding cycle is approximately 30 "."

The distinctive features of the line of machines until 1100 ton. (last born of the Sintesi series) presented in the 2001 K, are: ecological (the use of two servo-bombas of variable displacement with Master Slave device and controlled in closed ring, it has allowed to obtain relevant energy savings together with comparable information in the moulding solutions equipped with servo-válvulas, a high performance machine; flexible and versatile (Group of)) (injection is equipped with change fast camera); safe and ergonomic.

In addition, they incorporate control Aelian 3200, equipped with optical fiber system.

Sintesi 330 - produced a piece of transparent polycarbonate (a lamp for outdoor use lamp covers), with a press of the media series equipped with regulated electric motor by an inverter on the dosage, which allows a significant reduction of energy consumption, in addition to the sobre-posición of the movements. The profile of the spindle barrier has been studied to improve the speed of plasticizing and the quality of the melt

Molding cycle will be approx. 50 "."

Sintesi 580 - application of home-use. The press with a group of standard injection Euromap 6400 will produce a pot of 25 lt, mould supplied by the Swiss firm Otto Hofstetter. The cycle was approximately 13.5 "."