The amasadora continuous smaller Quantec G3 increases the flexibility in the manufacturing of PVC
8 April 2014
With the size 46,
By means of the others sizes with diameters in the zone of process of 60 to 110 mm, the series Quantec G3 reaches performances of until 6000 kg/h. To the equal that the models more M61 big, the size 46 stands out by his high efficiency regarding time and costs. From the installation of dosage, going through the signpost of control, until the granulated, all the components find entirely preinstalados in the frame of base. In situ, already only they have to connect the feedings of current, water and air compressesed; with what the installation and the put in operation can realizar in a minimum of time.
![The Quantec G3, with a diameter in the zone of process of 46 mm is the amasadora smaller entered in Chinaplas 2014... The Quantec G3, with a diameter in the zone of process of 46 mm is the amasadora smaller entered in Chinaplas 2014...](https://img.interempresas.net/fotos/950675.jpeg)
Thanks to the extremely compact execution, the space of installation required is very small, being only of around 3 m² for the size 46. The disposal of all the elements of control, near at hand direct of the hand of the operator of the machine, and his function optimised from the ergonomic point of view, reduces to the minimum the costs of operation. The termorregulación internal of the axis of the screw sinfín contributes significantemente to the reduction of the consumption of power. The characteristic property of the series Quantec G3 is the combination of the elements of the screw of four fins, optimised regarding the technician of the process, with the pines of kneaded in the box of the amasadora and the oscillatory movement in axial steering of the screw. Thanks to these constructive peculiarities, obtains an intense effect of mix, a wide spectrum of processes, as well as high performances in passing. To improve even more the high quality of the granulated of PVC manufactured, can configure freely the quantity and the disposal of the elements of transport, mezcladores and amasadores in the axis of the screw sinfín.
Wolfgang Walter, technical director in Buss, comments in this regard: “With the new Quantec 46 G3 have developed a system with which is possible to realizar frequent changes of format of fast and flexible way. We see a demand of the same especially in the markets of plastic of high growth in Asia, in which an every time greater quantity of small and average companies face the challenge to offer a high quality to an attractor trucks relation between price and performance”.