Karplast at Equiplast 2005
The fuel transfer is completely derivative of series, has 210 tonnes of clamping force and a horizontal panel with spindle of 50 mm, more of a vertical group with 32 mm spindle The machine is equipped with integrated hot channel and rotary table for the handling of the figure and can operate with two nozzles at the same time or sequentially.
2 + 2 Mold cavities is built by C.S. Plastic Stampi and produces a piece (rope brake) for the sector nautical comprised of 2 materials: Transparent polycarbonate and colored polyurethane.
You have chosen technical solutions with the attendant advantages: the use of servobombas piston variable displacement and integrated control and closed ring of use of flow, system of low pressure oil filter; change of the entire group of plasticizing in 15 minutes; new system of lubrication; large rectangular plates and ergonomic protections
Oima presents a fuel transfer for container and packaging of the Stratos SP series. The Stratos 900/180 SP model is exposed with a group of plasticizing of carving Euromap 900 and a group of 180 tons of force closure closure. For display at the fair comes installed a cast of 24 cavities for the production of plugs for mineral water built by Sacmi, to make known to the Spanish market, a typical piece of the sector in our SP presses for the production of caps for food usecosmetic and hygiene.
The press 900/180 SP that exhibits at the fair belongs to the Stratos SP series developed specifically for the production of the product of containers and packaging. The SP line press is a machine with force closure of 120 to 1000 tons and injection Euromap 600 to 12500 group.
The press integrates batteries of accumulators for movements of the extractor, cores and injection, use of proportional valve for high speed and response, servolválvula MOOG to ensure accuracy and independent speed. It comes installed an electric motor of high number of twists commanded by inverter for dosage and a hydraulic nozzle which allow the sobraposición of all the movements in this way reduce the cycle time. This line of presses mounted a spindle of plasticizing with a profile specifically studied to ensure a optimal plasticizing, high volume and high wear resistance. Their presses guarantee low cycle times and reduced consumption, thus the cost of each unique molded article is optimized.
The closure is of knee for 5 points and portamoldes dishes are made in steel,
The entire line of Oima injection presses can be customized in version dedicated to the fast moulding packaging and/or similar products.
