This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
JIT: inyectoras APM con control austriaco Keba en Equiplast 2005Just in Time Plastics introduces new Supermaster: injection machines manufactured by APM (Group Chen Hsong) covering the range from 100 to 1,300 tonnes of clamping force. They are equipped with control system
Keba manufactured in Austria and habitually employed by one of the most prestigious manufacturers of European injectors.
Machines APM Supermaster of JTP, are a modern and technologically advanced alternative to the injection of technical parts made of high quality, in cycles faster, getting content energy consumption. The speed and accuracy displayed by these theoretically conventional but comparable units, benefit, to sophisticated special high production machines, make the series Supermaster of APM, a very useful tool for the transformer. They are suitable for those with own product, and also for those who work for third parties. And this thanks to the rapid and flexible configuration of the machine, which allows changes of mould in short periods of time, with automatic adjustment of all parameters of work, including clamping force and thickness of mold; up 50 references in domestic and infinite way via disk or connection to mainframe.
There is a conventional Supermaster APM of 150 tons of closure, capable of injecting into a cast of four cavities, vessels in PS of 0.7 mm wall, 200 cc, with a less than 5 seconds cycle time. It is equipped with hydraulic accumulator on the injection. Other features of these machines are: the bushes of bronze graphite, lubricated auto of the closure, double cylinder parallel injection, that group at the same time slips on prismatic guides, advanced Keba control with color touch screen system. This provides very high performance, speed and stability of the process with a constant repeatability of cycle.