Repol group: composed of high-technology for a wide variety of applications in Equiplast 2005
For the automotive industry, it should be noted that since the month of October is distributor in Spain of compounds Sabic PP and Sabic PPcompound for this market, material based on polypropylene for applications outside of the car, on the inside and under the hood.
Together with the designer and manufacturer of components for Automotive Group Antolín, Repol group has developed for the automotive industry new thermoplastic compounds from GANF, the Burgos group carbon nanofibers. The new thermoplastic developed feature advanced properties, such as a low coefficient of friction, thermal and electrical conductivity, electromagnetic shielding, and an elastic module improved, among others.
For a wide range of applications
J & A Plastics manufactures technical plastic Anja (PC, PBT, PC/ABS and PC/PBT), and distributed in addition a wide range of technical plastics group Repol distributed at the same time in Spain and Portugal. This extensive range joins from the month of June the nylons of specialty as the range NycoPoly of PA6/66 for barrier films and extrusion monofilament, the nylon transparent (PA6/69) NycoTrans to replace the PA12 cost-effectively, the Nycolastic TPE (before NycoFlex) based on co-poliamida 6 technical modules of bending between 12,500 and 1,250 kilograms per square centimeter, and the blends and alloys for specific applications NycoLloy.
How Sabic PP and Sabic PPcompound products for the automotive market, the range includes polyolefins of high crystallinity, PP modified with rubber and elastomer MF, PP copolymers block, copolymers block MF and MF homopolymers.
The POM Kocetal of Kolon Industries Inc. added, made by this same company and also distributed by group Repol, the PEN-PET Nopla copolyesters of very good behaviour to temperature and a high resistance to impact for applications in bottles, film and moulding by injection and Vitret, amorphous copolymer transparent based on PET packaging in food or cosmetics.
Some products
- Polyamides from high tenacity for demanding applications.
- Dinalon PA6 reinforced with nanoarcillas, which loads below 8 per cent produce the rigidity of 20-30 per cent of mineral and constitute an alternative for applications in auto parts in which the density of the material is critical.
- Reinforced Dinalon, without halogen and red phosphorus fire-retardant polyamides. They allow to obtain most of colors while maintaining excellent mechanical properties.
- Natural polyamide Dinalon PA6 rapid cycles. It is suitable for any industry, including food, and can be dyed easily in any color.
- Anja technical plastics. Compounds made by J & A Plastics
- Nylons Nycoa hi-tech and extrusion. Among others, include the transparent polyamides NycoTrans which replace the PA12 on a competitive basis on specific applications, and the Nycolastic family of polyamide-TPEs flexible with benefits of the EPT and the cost and performance in the heat of the nylon.
- SABIC PP and Sabic PPcompound for the automotive market.
- POM Kocetal for applications in the automotive, graphic arts or electricity and electronics sector.
- Other technical plastics of Kolon Industries.