Alboex presents numerous peripherals at Equiplast 2005
Mills Zerma
This series can carry options like a high base for collected in a tank or sack, soplante and ciclón for extraction equipment equipment of the triturado and hopper bent.
The series GSC carries the soundproofing, the soplante and the ciclón included like standard. The trituración effects with the cut type tijera by means of the placing of the blades in “V”. It treats of mills or of half range until high range (5,5 kW until 75 kW) with aberturas of rotor of Ø 300 mm x 290 until 1000 mm, Ø of 500 x 500 until 1200 mm and Ø of 700 x 700 until 1200 m.
These models can carry blades and sieve reinforced to work with fibre of glass.
The series GS and GSH with powers of engine from 11 until 110 kW, are machine very robust with Ø of rotor between 350 and 800 mm with distinct widths. The rotors can be of three or five shovels.
These models carry like standard lateral plates to work with fibre of glass and the blades are pre-adjustable out of the mill, the useful remains included in the price of the same.
Of course can carry 3ª line of fixed blade as well as soplante and ciclón, detectors of metals, separadores of dust, cabins of soundproofing, etc.
The micronizadores for the pulverización of plastic in the manufacture of profiles and tubes form part also of the program of sales of Zerma, with 3 models that can reach some productions from 50 to 1450 kg/h. They can supply with tamizadores special to achieve the micraje suitable.
Atemperadores Tool Temp
The range goes up to the 144 kW of power with temperatures ranging from 90 ° C to 360 ° C. TEMP TOOL included as standard in many models the automatic emptying of the mold, the anti-fugas system, automatic filling of water (not to work with oil), the heating in phases and alarm.
It also has in its programme of atemperadores water pressure to work up to 140 ° C with a capacity of heating up to Max 24 kW. It also has specific equipment for the die-casting.
In refrigerators, Tool-Temp moves between a nominal capacity of 5 kW cooling to 216 kW. These coolers are automatic filling, the bombs in bronze, seamless and all components in contact with water are stainless steel. Of course, a safety thermostat, prevent the freezing of the apparatus.
Simulation of transport and centralized drying Labotek
It also includes gravity and volumetric mixer for mixing of up to 10 components and productions up to 2750 kg.
These last few years Labotek has improved its products mechanically and has concentrated its efforts on improving significantly the communications of its equipment and facilities system. This means that it has patented the system of a single Labotlink wire to connect the machines on centralized systems. Labotek only installs a cable to machine connections. You can also use the Labofix (based on Factorylink) or Labowin (access Win CC Office using Ethernet-based)
S Separation & Sorting Technology
In its programme of sales of metals of fall separators available free, Rapid Compact for installation at the exit of cyclones or transporters of vis without end, Protector and MFE for installation at the entrance of the machines injection and extrusion. Also have DF, SF and GF models for different applications in transportation for both vacuum and pressure pipe.
For tapes of transport we can install the ELS, GLS and DLS models in their patterns of simple detector plate and tunnel.
S can also provide system Unicon where the tape is incorporated, to be able to insert in any system of transport of tapes.